This is a "Medium" VHB Tape Mount that sticks with VHB Tape and creates an 8 mm offset from the surface.

If your Tiles are smaller than a 6x6, then use the Small VHB Tape Mounts.

This is a “Double-Sided Part A” piece, so it can be secured into place using a Single Snap (DS Part B). It can also be secured using 10 mm Mid Thread Bolts.

This mount comes with top and bottom versions that are placed at the top or bottom corners of your board.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io