Quad Snaps (DS Part A) - Small Command Strip Mount

This is a "Small" Command Strip Mount that is best suited for Multiboard Tiles that are smaller than a 6x6. They specifically use 3M Small Picture Hanging Command Strips and create an 8 mm offset from the surface.

If your Tiles are a 6x6 or bigger, then use the Medium Command Strip Mounts.

This is a “Double-Sided Part A” piece, so it can be secured into place using a Quad Snap (DS Part B). It can also be secured using 10 mm Mid Thread Bolts.

Get the 3M Small Command Strips here: https://geni.us/vxs8B (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io