By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
The “dual snap connector” is used to connect two tiles together with snaps.
This is a “Double Sided Part B” piece, so it joins with the Dual Snap Connector - DS Part A to create nice looking snaps on both sides of your tiles. Or it can connect to the Dual T Offset Snaps - DS Part A to secure them into place.
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
_-_Standard.png&w=3840&q=75)
