Use the “Command Strip Mount” to mount your Multiboard Tiles with a command strip. These are “Bolt-Lock Versions” and are useful if you want your entire Multiboard or segments of your Multiboard to be easily removable.
The part has a 4.6 mm offset that is paired with 3M Command Strips (3.4 mm thick), to create a total 8 mm offset from the surface. It has one push-fit and can fit a 24x20 mm command strip.
To set it up…
- Connect your Tiles together using:
- DS Snap Connectors (Part A & Part B) - When paired with the bolt lock mounts, this will create an 8 mm offset from the wall (look at image 3).
- Or use Regular Snap Connectors - When paired with the bolt lock mounts, the offset will be less than 8 mm, so to get the 8 mm offset use Bolt-Lock Mount Washers (look at image 4).
-
Then secure the mounts to your Tiles using 13 mm Small Thread Bolts.
-
Attach the Mounts to the surface using Command Strips. Follow the Official 3M Instructions.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io