4x2x1.5 - Topped Multipoint Rail - Standard Click-In Multibin Shell Extension
Use Standard Click-In Multibin Extensions to extend the height of Multibin Shells.
The Bottom Rim clicks into place and can be further secured using Pins. Keep in mind, the Bottom Rim takes up space inside of the Bin.
Multipoint Rail Walls:
-
Use “Multipoint Rail” Click-In Extensions if you want to extend “Topped Rail Multibin Shells”. If you have “Full Rail Multibin Shells”, then “Pop-In Extensions” are better.
-
This particular Extension has “Topped” Rails - Use Topped Rail Extensions if you aren’t going to extend the height of this Extension in the future. If not then use “Full Rail” Extensions.
You can also place Bin Bottoms inside of Click-In Multibin Extensions to give them a base.
Multipoint Dimensions:
This Bin Extension is 4x2x1.5 cells (200 mm long, 100 mm wide and 80 mm high). Stacking a 1.5 cell high Extension on a Multibin Shell will increase its height by 75 mm.
The internal distance between walls is 194x94 mm (although the bottom click rim will make it 188x88 mm). The internal height is 74 mm.
Simple Dimensions:
This Bin Extension is 4x2x1.5 cells (200 mm long, 100 mm wide and 80 mm high). Stacking a 1.5 cell high Extension on a Multibin Shell will increase its height by 75 mm.
The internal distance between walls is 194x94 mm (although the bottom click rim will make it 188x88 mm). The internal height is 74 mm.
Learn more about Bin Extensions at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io