Jonathan K
Jonathan K

4x1H - Bottom Multibin Divider

by
Multiboard
Multiboard
Multiboard
Multiboard
|
Image 1 of 2
4x1H - Bottom Multibin Divider 3d model
Multiboard
Multiboard
|
Image 1 of 2
4x1H - Bottom Multibin Divider 3d model
2D
3D
Makes
4x1H - Bottom Multibin Divider 3d model
4x1H - Bottom Multibin Divider 3d model

4x1H - Bottom Multibin Divider

"Bottom Dividers" always go below "Top Dividers" and are only needed on Bins that are taller than 1 cell. Bottom Dividers also stack on top of each other.

This Divider is 4 cells long (194 mm) and 1 cell high (50 mm).

Connection Types:

  • Connect the Divider to the Bin wall using Outer Wall Pins.
  • Connect stacked dividers using Dual Clips.
  • Connect Dividers to other Dividers in parallel using Inner Wall Pins.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.


This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io


15 Likes372 DownloadsAugust 30, 2024
This model is restricted by licensing terms.