3x2x3 - Simple Walls - Standard Click-In Multibin Shell Extension

Use Standard Click-In Multibin Extensions to extend the height of Multibin Shells.

The Bottom Rim clicks into place and can be further secured using Pins. Keep in mind, the Bottom Rim takes up space inside of the Bin.

Simple Walls:

• Use “Simple Walls” Extensions if you want to extend “Simple Wall Multibin Shells”.

You can also place Bin Bottoms inside of Click-In Multibin Extensions to give them a base.

Multipoint Dimensions:

This Bin Extension is 3x2x3 cells (148 mm long, 98 mm wide and 155 mm high). Stacking a 3 cell high Extension on a Multibin Shell will increase its height by 150 mm.

The internal distance between walls is 144x94 mm (although the bottom click rim will make it 138x88 mm). The internal height is 149 mm.

Simple Dimensions:

This Bin Extension is 3x2x3 cells (148 mm long, 98 mm wide and 155 mm high). Stacking a 3 cell high Extension on a Multibin Shell will increase its height by 150 mm.

The internal distance between walls is 144x94 mm (although the bottom click rim will make it 138x88 mm). The internal height is 149 mm.

Learn more about Bin Extensions at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io