2x2x3 - Topped Multipoint Rail - Pop-In Multibin Shell Extension

Only use Pop-In Extensions to extend the height of “Full Rail Multibin Shells”.

Pop-In Extensions use “Pop-In Extenders” to attach onto the Multibin Shell. Unlike “Click-In” Extensions, “Pop-In” Extensions don’t take up any space inside of the Bin.

Multipoint Rail Walls:

• This particular Extension has “Topped” Rails - Use Topped Rail Bins if you aren’t going to extend the height of this Extension in the future. If not then use “Full Rail” Extensions.

Dimensions:

This Bin Extension is 2x2x3 cells (100 mm long, 100 mm wide and 150 mm high). Stacking a 3 cell high Extension on a Bin will increase its height by 150 mm.

The internal distance between walls is 94x94 mm.

Learn more about Bin Extensions at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io