Printable Frames | One-Piece | Multiple Sizes
byMicropolitan
.jpg&w=3840&q=75)
This download includes a set of square frames designed to fit our 3D map models. See the included PDF for more info.
INSTRUCTIONS: 1. Pick your frame size. The name of each STL describes the interior and exterior dimension. This is to help choose a frame that fits your build plate and map model. 2. (Optional) Scale the frame. The frames can also be scaled to a custom size in the slicer. For example, if you printed your model at 188mm size, scale the 175mm interior frame by 108% ((188+1)/175*100 = 108). The frame interior should be at least ~1mm larger than your map model. Use the 'Measure' tool in the slicer to double check. 3. Print! 4. Assemble & Display. Use a small amount of glue or double sided tape to secure the model in the frame. Use the pre-cut notches in the back to hang it from a nail, or display on a shelf or tabletop!
The short frame profile is 15mm x 12.5mm. The tall frame profile is 30mm x 12.5mm.
Tip: The frames can be scaled to adjust the profile. E.g., If you want a wider frame, import a smaller frame size into the slicer and scale up the dimensions. The height can also be scaled.
Don't forget to post a 'Make' of your finished, framed pieces!