UNICORN PIGGY BANK (NO SUPPORTS + FOR MOUNTING ON WALL)

Combine useful with good look - Unicorn piggy bank that can be mounted on the wall. It will look as amazing unicorn decor, but secretly it will double as a piggy bank!

This design includes 3 files:

1. main file - the piggy bank
2. bolt - to use to seal the piggy bank
3. Hole marker - to help you mark the hole place for the screws.

Printing settings:

Unicorn piggy bank main:

NO SUPPORTS NO BRIM Print Dimensions: Height = 14.5 cm (5.71 Inches) | Base = 10.5 cm x 18.2cm (4.13 Inches x 7.16 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 3 hours and 45 Minutes Amount of material required: ~ 35.5 m

Bolt piece:

NO SUPPORTS NO BRIM Print Dimensions: Height = 13.9 cm (5.47 Inches) | Base = 18.7 cm x 13.5 cm (7.36 Inches x 5.32 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 19 Minutes Amount of material required: ~ 2.5 m

Marker for holes:

NO SUPPORTS NO BRIM Print Dimensions: Height = 0.2 cm (0.08Inches) | Base = 5 cm x 2 cm (1.97 Inches x 0.79 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 10 Minutes Amount of material required: ~ 0.5 m

TOTAL PRINT TIME: 4 HOURS AND 14 MINUTES TOTAL MATERIAL USED: 38.5 M