Aquaponics Hydroponics tower modular 2" net pods

This is all my files to print your own tower, you will need a 250mmx250mm bed to print these as they are large. I recommend a .8mm or 1mm nozzle cuts down on print time and adds strength. Besides the files you will need some 5mm bolts or eye hooks depending if you plan to hang this tower, also some pipe like the pvc I used to mount this into a a planter pot. All the fitting sizes I used are designed to be 3/4" but if you want I can change that size for you or if want to modify my designs I am more than willing to share Freecad files with those that purchased this. Feel free to message me with any questions. I have a different design to do 4" net pods as well but its a way bigger tower

List of files Tower top inside fill Tower Bucket Tower Bucket stylized Tower Bucket connector Tower flat bottom (its a flat ring for the tower so you can make your own mounts to it) Pot mudule A and B (offsets the net pots from one another) Tower Bottom PVC Pipe, allows you to tie the tower onto some cross section of piping