Voron CAN-do it!
Switching your Voron 2.4 or Trident to CAN is an excellent way to lose the bulk and drag of cable chains. However it means you need to relocate your Y Endstop microswitch off of the X gantry. This design replaces the wire organizer on the right rear motor gantry. This mount holds a standard microswitch & PG7 wire gland for strain relief on you umbilical / can cable.
Two versions are included a "Multi" version that has the Voron logo as separate bodies for multi-color printing. The other version has the Voron logo inset for single color prints.
Also includes a "Bumper" to actuate the Y Endstop in its new location. The bumper replaces the Y axis cable chain mount.
Parts Needed (Affiliate Links):
- DF2-5L Microswitch (Voron BOM part): http://shrsl.com/422xl
- M3x8 Screws: https://amzn.to/3AYdAMc
- PG7 Cable Gland: https://amzn.to/43Kwfaj
- Polymaker Filament: https://tinyurl.com/Polymakerr
Files Included:
- Y Endstop Relocation PG7 Mount STEP File
- Y End Stop Bumper STL
- Y Endstop Relocator STL
- Multi-Color Y Endstop Relocator STL
Recommended Print Settings:
- 4 Perimeters
- 20% Infill
- No Supports Required
- ABS or ASA Filament recommeneded.
- "Multi" STLs require using "Split -> To Objects" in your slicer. Then you can color the individual bodies.
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/links
Design covered by GPL3 Open Source license. Any Remixes or Derivatives are required to adhere to license terms & use the same license.
PLEASE Attrubute any Remixes of my designs: MandicReally