Select a membership plan

$10.00
/ month

This tier is for those who wish to support our design and content efforts. Members are entitled to early design releases and input on upcoming design projects.

Merchant Tier
$15.00
/ month

This Plan entitles you to be an Authorized Reseller of MandicReally / HotRodHippie Designs! Please read the Licensing Agreement IN FULL to understand the terms:

READ THESE TERMS BEFORE SIGNING UP!

Commercial Use License Agreement

  1. Introduction and Terminology

By subscribing to the "Merchant Tier", You (referred to herein as "Licensee" / “Reseller“),

agree to the terms outlined in this Commercial Use License Agreement.

  1. Validity and Termination

This license is valid only as long as you remain a "Merchant Tier" subscriber & are in good standing under the terms of this agreement. We reserve the right to enforce the terms of this agreement including but not limited to removal from the program, shop listing removal request, or further legal action. Upon termination, you must cease selling any printed models derived from our designs & remove your store listings immediately.

  1. Rights Granted

Licensees may resell physical 3D printed models created from select 3D digital files produced by Alan Mandic (MandicReally). Designs featuring third-party intellectual property are not authorized for resale. A list of authorized designs is available at [Licensed Designs] (https://www.hotrodhippie.com/licensed).

  1. Early Access and Resale Information

Licensees will receive early access to Patreon-exclusive designs with explicit resale authorization details. If a design is not authorized for resale, it will be clearly noted. Please read posts for this information.

  1. Listing and Reporting

Licensees will appear on HotRodHippie.com’s Authorized Sellers List. To be included, provide your business name and links to platforms where you intend to resell designs. Please, report unauthorized sales to protect both parties (MandicReally & Resellers).

  1. Attribution Requirement

Credit "Alan Mandic aka MandicReally" in all sales listings as follows:

"© 2023 • Designed by: Alan Mandic aka MandicReally / HotRodHippie".

  1. Marketing Responsibility

Marketing is solely the responsibility of the Licensee. Using our original images or videos is prohibited.

  1. Social Media Conduct

Do not promote your services in the comments sections of Alan Mandic's social media platforms, including but not limited to TikTok, YouTube, Facebook, Twitter, and Instagram.

  1. Modifications and Intellectual Property

No modifications to design files are allowed. Submit modification requests to Alan@MandicReally.com. Please contact for personalization authorization such as adding names to existing designs.

  1. Changes to Terms and Cancellation

We reserve the right to modify these terms or cancel any license at our discretion. Changes will be communicated publicly and directly to Licensees.

  1. Billing

Billing occurs immediately upon subscription and renews on the same day each subsequent month.

  1. Audit Rights

MandicReally reserves the right to Audit Resellers listing for compliance with the terms and conditions herein outlined. As well as seeking unauthorized Resellers who have never been authorized or left the resellers program.

  1. Dispute Resolution As a Licensee / Reseller you may contact Alan Mandic via email with any disputes or issues you may have. We will do our best to resolve any issues or grievances you may have with this agreements terms, the enforcement of them, or issues related to the resale of them. We make no guarantee of satisfactory outcome but promise to do our best to resolve all issues in a timely manner.

  2. Legal Liability

Any legal and/or financial liability incurred by the resale of these designs is the sole responsibility of the Licensee / Reseller. Alan Mandic dba. MandicReally / HotRodHippie, makes no promise or guarantee of liability for any legal issues that may arise. This may include but not be limited to, personal injury, copyright infringement, illness, death, or tax burdens incurred.

Keep updated on current terms by checking this page or visiting Patreon or HotRodHippie Licensing.

Alan M
MandicReally16K followers
MandicReally
MandicReally
|
|
Image 1 of 2
12oz Mini Nuke - Fallout 4 Can Cup! - 3D Printed "Mini Nuke" can cup for 12oz Cans! - 3d model
MandicReally
MandicReally
|
|
Image 1 of 2
12oz Mini Nuke - Fallout 4 Can Cup! - 3D Printed "Mini Nuke" can cup for 12oz Cans! - 3d model
12oz Mini Nuke - Fallout 4 Can Cup! - 3D Printed "Mini Nuke" can cup for 12oz Cans! - 3d model
12oz Mini Nuke - Fallout 4 Can Cup! 3d model

12oz Mini Nuke - Fallout 4 Can Cup!

This model is restricted by licensing terms. 

This design is inspired by the Mini Nukes from Fallout 4 and is a fun way to hold your 12oz Beverages! A fun and silly can koozie for your soda, pop, soda pop, seltzers, and beer enjoyment! NOW INCLUDING A NOSE CONE! The new add-on turns the Mini-Nuke into a display model or storage box! (Plug and Nose Cone are available separately for those who already downloaded this design previously.)

This design is LARGE as the design required to really get the full effect. The handled version is 166.80mm wide by 140mm wide by 159.50mm Tall. Make sure your print volume can fit it! The diameter of the main body is 116mm so the Handle-Less version isn't for small hands.

Fits standard 66mm 12oz cans. Also features a bottom hole to help push the empty can out and allow air to escape while installing the can.

  • UPDATES (05/30/2021):
    • Added "Nose Cone" file so you can use the design as a more complete display!
    • Added a "Plug" to cover the hole in the bottom so it can be used as a storage box.

  • INCLUDED FILES:
    • Handled Version
    • Handle-Less Version
    • CAD STEP File to see the designs and learn.

  • PRINT PARAMETERS:
    • No Supports Required for the Cup.
    • "Nose Cone" requires support on outer brim edge, but not in the middle.
    • 3 Perimeters minimum Recommended
    • 15-25% Infill Recommended

Mine was printed in "Army Green" Jessie PLA from Printed Solid.


Want to Support what I do? Check out my social medias please!

LinkTree: http://www.HotRodHippie.com/links


All of my Designs are covered by a Creative Commons Non-Commercial License. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally

Community Makes (11)
Fun print, good size for my meat mits.
Make by user
Here’s my print of this mininuke
I love this thing. Thanks for the design. Printed on a de-Elegoo’d Neptune 4 Pro with Zyltech Dark Green PLA.
A few minor modifications to separate out key elements and then apply the ol' ERCF!!
Insert from same author printed in translucent green resin on epax printer. Will add inverted switch and led so it lights up when lifted out
The no handle nuke!
Make by user
It's alive!
Make by user
Make by user
Fun print, good size for my meat mits.
Make by user
Here’s my print of this mininuke
I love this thing. Thanks for the design. Printed on a de-Elegoo’d Neptune 4 Pro with Zyltech Dark Green PLA.
A few minor modifications to separate out key elements and then apply the ol' ERCF!!
Insert from same author printed in translucent green resin on epax printer. Will add inverted switch and led so it lights up when lifted out
The no handle nuke!
Make by user
It's alive!
Make by user
Make by user


Community Makes (11)
Fun print, good size for my meat mits.
Make by user
Here’s my print of this mininuke
I love this thing. Thanks for the design. Printed on a de-Elegoo’d Neptune 4 Pro with Zyltech Dark Green PLA.
A few minor modifications to separate out key elements and then apply the ol' ERCF!!
Insert from same author printed in translucent green resin on epax printer. Will add inverted switch and led so it lights up when lifted out
The no handle nuke!
Make by user
It's alive!
Make by user
Make by user
Fun print, good size for my meat mits.
Make by user
Here’s my print of this mininuke
I love this thing. Thanks for the design. Printed on a de-Elegoo’d Neptune 4 Pro with Zyltech Dark Green PLA.
A few minor modifications to separate out key elements and then apply the ol' ERCF!!
Insert from same author printed in translucent green resin on epax printer. Will add inverted switch and led so it lights up when lifted out
The no handle nuke!
Make by user
It's alive!
Make by user
Make by user

Discussions
Y
y9qfrwqsrh
I love this thing. Thanks for the design. Printed on a de-Elegoo’d Neptune 4 Pro with Zyltech Dark Green PLA.
I love this thing. Thanks for the design. Printed on a de-Elegoo’d Neptune 4 Pro with Zyltech Dark Green PLA.  3d model
Popples
Popples
Fun print, good size for my meat mits.
Fun print, good size for my meat mits. 3d model
 3d model
 3d model
PrinterOther
Printer modelAnycubic Kobra 3 Max
Print bed sizeX: 420 mm; Y: 420 mm; Z: 500 mm
MaterialPETG
Layer height0.2 mm
Cory A
andersoncory11
 3d model
jnangano
jnangano
Here’s my print of this mininuke
Here’s my print of this mininuke 3d model
PrinterPrusa XL
Rob R
robofjoy

I made an account just so I can come and say that your work is amazing. Love the MiniNuke Cup design! Thank you so much for sharing your efforts. I will follow you on Instagram.

Alan M
MandicReally

Nope, neither design requires support. On somewhat unstable machines it may help improve the bridging and handle quality but I've never printed one with any supports.

Joshua J
Joshua_Jay

This is amazing work! Does the version with a handle need supports to print?

Gekko
gekko2117

Are you by chance making a version of this for 16oz cans? I see your Kyle kup and 10mm go to 16, but i prefer this design, Thanks in advance.

Alan M
MandicReally

I wouldn't know. I'm working on bottle specific designs but bottles vary WILDLY in size and shape so they are proving extremely difficult to accommodate. As well as being hard to get a tight fit.

Jimi A
turboturttle423

what would you scale this to , to be able to hold say a bottle

View all 18 discussions

12oz Mini Nuke - Fallout 4 Can Cup!

4.5K downloads · 5 years ago in 
Alan M
MandicReally16K followers
This model is restricted by licensing terms.