Feet, arms, eyes, nose and a mouth which can be added to your Halloween pumpkin!

Also there is a knife and a axe which can make your pumpkin more scary.

The scale is for a pumpkin with around 20cm diameter. If your pumpkin is different, scale the parts to your needs.

Arm and Feet you can simply mirror in your slicer to get the other side. I recommend to use auto orientation in your slicer. The pin and feets can be placed flat on the printbed.

You can just carve your pumpkin like you want and then add some feets, arms, nose and eyes to it. Also i made a mustache and a tongue.

The feet will give your pumpkin a good stability.

Or you can add all the accesoires to your pumpkin without carving.

For the mouth there is a cutter model, with which you can cut out the shape for the mouth. Insert it with some sensitive hits with the hammer or something similar. Then simply insert the mouth into the cutout.

The eyes can be printed with a color change at height.

For each part you will need a pin, exceeding the mouth insert.

I recommend to make the pin holes into the pumpkin with a 3mm, 3.5mm or 4mm drill to reduce the necessary force for inserting.

You can shorten the pins If you do not need the complete length.

Would be happy to see your makes!