There comes a time in all of our lives where we realize that we will never be as cool as Chill Pepe... this is called enlightenment
Select Rejected Animals are now available as 3D printable 'decals'! These flat prints are a quick and easy way to bring my 2D illustrations into the real world while keeping the simple charm of the pen illustrations.
Just swap filaments at 2.5 mm layer height, no multicolor printer required!
Scale is designed to be easy to print, but you may have success scaling down, either uniformly or just in the X/Y axes.
Download includes several variations
- original : just a flat decal that you can stick wherever with UHU Putty, mounting tape, glue on magnets, carry in your pocket for emergencies, etc...
- magnet : glue in 6mm diameter magnets (2 mm or 3 mm height is fine) with E6000 or similar adhesive. This version makes the magnets lower profile, but they may be visible from the front if your filament isn't very opaque, in which case I would suggest using the original and just gluing on magnets.
- ornament : includes loop to connect to any keyring, metal or printed. Or make an ornament!
- standing + stand : friction fit onto stand to display on a shelf, table, dashboard, etc...
- spike : 20 mm spikes to stick in your lawn, planters, birthday cake, etc...
Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Polymaker PolyTerra Matte PLA (US direct).*
*These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!