Cats need grass for their digestive system. Grow them a nice patch of grass with ease. Use the lid if your cat likes to tear out grass to prevent them! 

Print instructions:
- PLA / PETG
- 10% infill
- no supports

For growing in water you will need the Jar and the water insert. The lid is optional. 
Place a paper towel over the insert if your seeds would fall through otherwise. Fill the Jar with water. Place the insert with the seeds into the jar. Now close it with the lid if you want to. Place it according to your seed package. Make sure the seeds do not dry out. Once roots form, they will wick the water upwards and you just need to refill the Jar every 1-2 weeks. 

I used about 1 tablespoon of seeds for this planter. 

My seed package said: cover with 1 cm of soil at 18 - 22 °C. So I placed it into a drawer in my kitchen until it sprouted. It took 3 days. The grass on the picture grew for about a week. 

For growing in soil you will need the Jar and I recommend using the lid. Place soil into the jar until you are level with the three columns. Place your seeds onto the soil. Cover them with more soil if your seed package said so. Then keep it damp for the next 3-5 days and your grass will sprout. 

I used about 1 tablespoon of seeds for this planter. 

When the grass is done, remove it and start growing again. Maybe have two sets and alternate between them to always provide fresh grass! 

 Feedback is as always welcome, it greatly helps me to improve my designs! 

cat grass planter

cat grass planter-Insert.3mf

cat grass planter-Jar.3mf

cat grass planter-Lid.3mf

Explore the world of chess with this precise 3D model of a fold-able chessboard with storage.

The chessboard can be printed in PLA with a 0.2 mm layer height. The chess pieces are color-adjusted post 4.6mm starting from white and changing to black. With a recommended print infill of just 10%, the model is not only accurate but also efficient. It's been tested to work equally well with PETG, ensuring flexibility for your printing preferences. Print endcap and storage twice. 

For assembly cut 9 strands of filament (1.75 mm) to about 19.5 cm and slide it in according to the picture. Twist the filament whilst sliding in if you get stuck. 

Once the game is done, the chessboard has an storage system. Simply slide the pieces into the designated bins and slide the board onto one endcap. The storage bins can then be placed into the tube and secured with the second endcap, making the entire setup compact and portable.
The finished board is about 25 x 25 cm. Each field is about 2 x 2 cm.

Thank you for your support and please feel free to reach out if you have any questions or feedback for me. 

>> designed by Magdaj and available on Thangs.com under the category "Toys & Games/Board Games". 

Chessboard foldable with storage

storage.3mf

endpiece.3mf

endcap.3mf

Achessboard.3mf

Bchessboard.3mf

Challenge your cat (or small dog) with this print! Insert some treats and watch your pet rolling the tumbler around to get to the treats!

Standard PLA settings are perfect for printing. For assembly cut 9 Strands of filament to 9.5 cm and hinge the parts, as shown in the picture, together. Make sure the parts with the opening are exactly opposite to each other!

I have provided different difficulty levels. Choose a end cap and insert, you do not need to print them all. You can change the difficulty later on. 

cat treat tumbler

Insert veryeasy.3mf

Insert easy.3mf

Insert medium.3mf

cattumbler.3mf

endcap-easy.3mf

endcap-medium.3mf

endcap-hard.3mf

Hi, I do Love Cats and make cool Things for them :)
Sometime projects do not involve cats, then my cat reminds me quickly that such behavior is unacceptable!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Magdaj

Achievements

Seedling

Debutant