L

Berd Air Duct for EVA.stl

by
Lukas83
Follow
Follow
Remix Model
L
Lukas83
|
Image 1 of 2
Berd Air Duct for EVA.stl 3d model
L
Lukas83
|
Image 1 of 2
Berd Air Duct for EVA.stl 3d model
2D
3D
Makes
Berd Air Duct for EVA.stl 3d model
Berd Air Duct for EVA.stl 3d model

I have made a Berd Air duct for the EVA print head. I tested it only with the Dragon hotend so far.

There are little notches as a guide for the holes in the pipe. I closed the pipes by soldering them. You can use the drilling jig to cut the pipes to the correct length of 32mm. Just put the 3mm pipe into the hole, drill it with a 1,5mm drill and then cut it.


5 Likes22 DownloadsOctober 24, 2021


5 Likes22 DownloadsOctober 24, 2021