A wall mounted planter that can be easily removed from the wall via a sliding dovetail. Can be printed with or without drainage holes. If you print with drainage holes, just take it off the wall and water in the sink.

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

Orientation The planter should be upright with its bottom on the build plate. The mount should have the sliding dovetail facing up.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware Filament: Bambu Lab Latte Brown Matte PLA Hardware: #10-12 x 1-1/4 in screws with plastic anchors

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods