An inverted version of the test tube propagation mount.
3 different versions:
- Small (screw mounted)
- Full length (screw mounted)
- Full length (command strip mounted)
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the test tube, the screw holes are designed specifically for #8-10 x 1 in anchors and screws, and the command strip mount is the exact size of a regular large command strip.
Orientation The mounts should be upside down and the cleat should have the longer side facing down.
Print Settings .2mm layer height 15% grid infill 2 walls Monotonic top and bottom surface pattern
Filament & Hardware Filament I used for this print: Hatchbox Matte Ash Gray PLA Overture Matte Light Brown PLA Test tubes Hardware: #8-10 x 1 in anchors and screws Command Large Refill Adhesive Strips
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/