tracking pixel
Brian H

Planter with Legs - The Tyler

by
LoftedGoods
Follow
Follow
Remix Model
LoftedGoods
LoftedGoods
Image 1 of 6
Planter with Legs - The Tyler 3d model
2D
3D
Makes
Planter with Legs - The Tyler 3d model
Planter with Legs - The Tyler 3d model
Planter with Legs - The Tyler 3d model
Planter with Legs - The Tyler 3d model
Planter with Legs - The Tyler 3d model
Planter with Legs - The Tyler - Pot: Dynalabs PLA Boutique Verde Aviador
Legs: Voolt3D PLA velvet Cappuccino  - 3d model
This model is restricted by licensing terms. 
64 Likes178 DownloadsJune 28, 2024
This model is restricted by licensing terms. 


This is the largest planter I've designed at 6.5"! The legs print separately and fit together (similar to the Classic Planter).

Supports Normal supports are needed for the underside of the pot.

Scaling Can be scaled up or down. I wouldn't scale it too far down though as the legs wont fit together.

Orientation The planter prints upright with its bottom on the build plate. Both legs print flat.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware Filament: Bambu Lab Ivory White Matte PLA Bambu Lab Latte Brown Matte PLA

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://bento.me/loftedgoods


64 Likes178 DownloadsJune 28, 2024




This model is restricted by licensing terms. 
64 Likes178 DownloadsJune 28, 2024
This model is restricted by licensing terms.