LFC Gengar Hueforge

*** Please follow all the directions so that you may have a successful print. ***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Hatchbox Pink Transmission Distance: 12 PLA Hatchbox Purple Transmission Distance: 2.6 PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Pink At layer #14 (1.2mm) swap to Purple At layer #19 (1.6mm) swap to White for the rest.