tracking pixel
Luís C

Drone Propeller Cut Tool for Dremel

by
LCruz3D
Follow
Follow
Remix Model
LCruz3D
LCruz3D
Image 1 of 8
Drone Propeller Cut Tool for Dremel 3d model
2D
3D
Makes
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
Drone Propeller Cut Tool for Dremel 3d model
This model is restricted by licensing terms. 
0 Likes1 DownloadsJanuary 16, 2024
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2868138.

Made this to cut old props to the specific length i wanted. I use a old damaged 1104 motor i had as a rotation axis for the prop. I'm using a 1mm end mill - https://bit.ly/2Jeeoj8

Each hole for the motor Block has the number prop length in inches. On my pictures you can't see it well because i forgot to configure the supports when i made the Gcode. ;)

I have two versions for the motor block (rotation axis for the prop). Threaded version - to print in ABS and use a M3 tap. Insert version - to print in PLA, heat a M3 insert in the tip of a long screw and gently push it throught the hole. Works like a charm!

Beware of the end mill when using this tool.


0 Likes1 DownloadsJanuary 16, 2024




This model is restricted by licensing terms. 
0 Likes1 DownloadsJanuary 16, 2024
This model is restricted by licensing terms.