All aboard the Polar Bear Express --- it's snow joke!

- Comes in 2 forms! -a stand alone figure and one with a loop hole for an ornament or keychain (etc).

-auto tree supports are recommended to print this file for a flawless print. I did print this without supports and it CAN print without supports, but you may get a little bit of strings around the train overhangs.

-The wheels are a separate print plate and there are no special print settings for them.

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Polar Bear Express

Polar Bear Express .3mf

Gingerdead Man – Bite me if you dare… the Gingerdead man is here!!

 Comes in 3 forms! -a figure, one with a hole (for keychains/jewlery, etc), and one cut for a magnet hole 6x3mm

auto tree supports were used for this file.

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Gingerdead Man

GingerDead Keychain.stl

A Christmas Spirit for your Christmas spirit! ...seriously though, this is one of my favorite latest designs

Comes in 3 forms! -a figure, one with a hole (for keychains/jewlery, etc), and one cut for a magnet hole 6x3mm

auto tree supports were used for this file.

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Christmas Spirit

Christmas Spirit.stl

Here's a little Cranbeary Sauce to add to your Thanksgiving Feast and Christmas Dinner!

Comes in 3 forms! -a figure, one with a hole (for keychains/jewlery, etc), and one cut for a magnet hole 6x3mm

-No special settings for this file!

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!



Cranbeary Sauce

cranbeary sauce keychain.stl

A little hare to hare-vest your pumpkins for the fall season !

Comes in 3 forms! -a figure, one with a hole (for keychains/jewlery, etc), and one cut for a magnet hole 6x3mm

I used basic auto tree support settings for this file

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Hare-vest

Hare-vest keychain.stl

A cute little bear peeping up out of this Rootbear Float!

Comes in 3 forms! -a figure, one with a hole (for keychains/jewlery, etc), and one cut for a magnet hole 6x3mm

-no special print settings for these files!

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!



Rootbear Float.3mf

Rootbear Float Keychain.stl

A cute little pumpkin cat combination! This Purrrumpkin cat comes in 3 forms. 1 as a figure, 1 with a hole for jewelry/keychains, and 1 flat cut for a magnet! (magnet size is 6x3mm)

no special print settings for this file

--If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!


Purrrumpkin

Purrrumpkin magnet.stl

This is a little Ghostmallow peeping out of a Smores treat. The files you will see are the size of the mini one. Available as a stand alone figure and available with a ring on top for keychains, jewelry, etc!

I used basic auto tree supports for these files

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Smores Ghost

Smores Ghost Keychain.stl

A Pouting Penguin with a happy little pumpkin on top of his head.

This is available as a regular figure and available with a loop for customizing as a keychain, necklace, earrings, etc.

 -STL file and 3MF file.

No special print settings for these files

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Pouty Penguin

Pouty Penguin keychain.stl

Here is a huge drop of my Halloween models set! Including a hollow house and 2 jack o lanterns you can use for lighting!

- auto tree supports are used for some models.

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Halloween Trick or Treat Set

House.stl

Bride of Frankenstein.. in ghost form! I have both Frankenstein and Bride of Frankenstein ghost models available!

- auto tree supports used 

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Bride of Frankenboo Ghost

Bride of Frankenstein Ghost.stl

Frankenboo 3mf and stl files!

- auto tree supports used 

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Frankenboo 

Frankenboo.stl

Hear no Evil, See No Evil, Speak No Evil ... ghost edition
- auto tree supports used 

-If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs!

Hear No Evil, See No Evil, Speak No Evil

Hear No Evil, See No Evil, Speak No Evil.stl

Here is Fiona ghost with her ghost babies! 
I used auto tree supports 

If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs! 


Fiona and baby ogre ghosts

Fiona ghost .stl

Shrek ghost figure! Holding an onion because even ghostly Shrek's have layers ~

I used auto tree supports/default settings

If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs! 


Shrek Ghost

Shrek Ghost.stl

Wolverine Ghost STL and 3MF files to go with my Deadpool ghost!

I used auto tree supports / default settings 

If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs! 


Wolverine Ghost

Wolverine Ghost.stl

Ghostpool STL file
I used auto tree supports / default settings 

If you need commercial rights to 3D print my designs, make sure to subscribe to my merchant tier here on thangs! 


Ghostpool

Ghostpool.stl

This tier enables you to sell my models as long as you are subscribed as a Merchant. **You will also get a monthly exclusive model every month (Starting January 2025)! **Thank you so much for your support!

- You will see no files under this plan. Files are free to everyone for PERSONAL use. **Subscribing to my merchant tier allows COMMERCIAL RIGHTS to the subscriber to sell my prints**

Comercial License: Selling is allowed ONLY under this tier as long as you are actively subscribed to this tier. If you stop your subscription, your license is IMMEDIETLY VOIDED.

Giving Ownership: I retain all ownership of these STL files. You cannot claim them as your own or modify them without my permission.

Own Your Sales: I am not liable for the quality, safety, or legality of the prints you sell. As the seller, you assume full responsibility.

Agreement by Action: Subscribing to this tier signifies your acceptance of these terms.

Failure to follow these guidelines will result in appropriate consequences and a permanent ban.



Merchant Tier

I'm Katie, I create cute little punny chibi characters for 3D printing

*merchant tier available to sellers!*

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Katie Hooper

Achievements

Seedling

Debutant