Foldx is a 3d printable foldable multi-tool inspired in the swiss army knifes. You can mix different parts of this kits to make your own every day carry foldable tool. 

**You can find the rest of the parts to complete this tool for free in my profile. 
**
This is a remix of Maquina's vernier caliper used as a base and just had to make some parts smaller to make it fit.

**If you like this project  please follow me and check the remixes and my other models for compatible accessories.**

_Please note: This model is for personal use only and is not intended for commercial purposes unless you purchase a commercial license from my Printable's club._


FOLDX - Foldable Multi-Tool - Mini Caliper Tool-head

Foldx - Minicaliper.stl

Foldx

**FOLDX - Foldable Multi-Tool - Mini Pliers Tool-head**

Foldx is a 3d printable foldable multi-tool inspired in the swiss army knifes. You can mix different parts of this kits to make your own every day carry foldable tool. You can find the spring, multi-tool holders and other tool-heads in my profile. 

This upload includes:

Mini Pliers Tool-head (Print-in-place)
 

Printed in PLA, it's perfect for light-duty usage, like desk or office tasks. If you're planning on heavier duty use, you might want to experiment with different materials.

**If you like this project  please follow me and check the remixes and my other models for compatible accessories.**
_
Please note: This model is for personal use only and is not intended for commercial purposes unless you purchase a commercial license from my Thang's club._

FoldX - Foldable Multi-Tool - Mini Pliers Tool-head

FOLDX - Mini Pliers Tool-head.stl

**FOLDX - Foldable Multi-Tool - Screw Bit tool-head**

Foldx is a 3d printable foldable multi-tool inspired in the swiss army knifes. You can mix different parts of this kits to make your own every day carry foldable tool. You can find the  spring, multi-tool holders and other tool-heads in my profile. 

**This upload includes:**

Screw bit
Screw bit holder shell/scales


Printed in PLA, it's perfect for light-duty usage, like desk or office tasks. If you're planning on heavier duty use, you might want to experiment with different materials.

If you like this project  please follow me and check the remixes and my other models for compatible accessories.
_
Please note: This model is for personal use only and is not intended for commercial purposes unless you purchase a commercial license from my Thangs club._

FoldX - Foldable multi-tool - Screwdriver bit tool

FOLDX - Screwbit Tool-head Holder Shell Lid.stl

Foldx- 3d printable foldable multi-tool

Foldx is a 3d printable foldable multi-tool inspired in the swiss army knifes. You can mix different parts of this kits to make your own every day carry foldable tool.** You can find the rest of the parts to complete this print in my profile; springs, single-tool holders and tool-heads **

This upload includes:

Double tool holder
Divider
Triple tool holder
Shell lid


Please consider following me & check my other models and remixes to download compatible tool-heads, springs  & accessories. Some pictured tool-heads are still not available but will be soon!

_
Please note: This model is for personal use only and is not intended for commercial purposes unless you have an active subscription to a commercial license in my Thangs Subscription Tier.
_

FoldX - Foldable multi-tool -Double and Triple tool-head holder

FOLDX - Double Tool-head Holder.stl

This is an alternative shell/scales for my 3d printable foldable multi-tool. You can download the spring and tool-heads to make your own here:
 [FOLDX basic ](https://thangs.com/designer/Jt40/3d-model/FOLDX%20Basic%20Kit%20-%20Customizable%20Foldable%20Multi-Tool%20-1149942
)

This version holds a single tool head and features a grip-shaped design for enhanced ergonomics and ease of handling.

**Assembly Instructions**

The assembly process is straightforward: simply print the parts, snap the interior pieces together, and close the shell. It’s secure as is, but for added confidence, you can apply a small dab of superglue at the shell’s contact points.

**If you enjoy this project, please consider following me and checking out my other models for additional compatible accessories.**

_Note: This model is intended for personal use only and is not for commercial purposes unless you have an active subscription to a commercial license._

FoldX - Foldable multi-tool - Grip Shell

FoldX-Grabshell-Singlemount-.stl


This is an ergonomic utility blade holder modeled to fit a standard Stanley blade. It does not need screws as the head of the holder has a small latch that bends down allowing to slide in the blades. Light duty use only.

Prints in 3 pieces as pictured and snaps together by contact, you can put a tad of glue in the holder to secure everything in place. No supports needed. Make sure you have a good first layer so that the blade holder latch does not fuse. My slicer makes a 0.5 width first layer by default so i changed it to 0.42 and the clearence is perfect.  Use extra walls and  over 25% infill to have a firm piece.

Update: Added 2 sheath options; lid only cover & belt clip holster;

Ergo Utility Knife/Blade Holder w/sheath

Middle (1).stl

Made this carry on holster for my folding utility blade but will hold safely swiss knifes or other tools if scaled evenly.

Fitted to be used with  my models:

Folding utility knife v1

[Foldable Multi-tool v2](https://than.gs/m/1149942)

Carry holster / sheath for Foldable Multi-tool v2

MINIKHOLSTERv2.stl

Shell printed in a single extruder 3d printer doing a same layer color change.

To be used with my V2 Foldable multi tool, free download in my models.

The Legend of Zelda shell for V2 Foldable Multi-tool.

ZELDA1.stl

FOLDX - Foldable Multi-Tool -  Basic Kit 
 No Screws, No Supports.

I first designed this as a foldable utility blade holder with inspiration from the classic Swiss knife folding mechanism.  I then created other tool head options using the same body.

 The assembly process is easy—just print the parts, snap the interior pieces together, and close the shell. It’s quite secure on its own, but if you want extra confidence, add a small dab of superglue on the shell’s contact points.

Printed in PLA, it's perfect for light-duty usage, like desk or office tasks. If you're planning on heavier duty use, you might want to experiment with different materials.

I've been giving away a bunch of these to friends and family, and they all really enjoy them—especially for keeping at their desks for quick tasks.

Included :
-Single tool-head holder.
-Utility Blade Holder: Compatible with standard utility blades (Stanley 1992)
-Short Utility Blade Holder: Fits smaller "D" shaped utility blades
-Soft Saw Head
-Bottle Opener Head
-Box Opener Head
-Comb Head
**-Template Head: Use it to make your own tool head!** 

If you like this project, please follow me & check tmy other models for additional accessories compatible with this tool.



Please note: This model is for personal use only and is not intended for commercial purposes unless an active commercial license is purchased.

FOLDX Basic Kit - Customizable Foldable Multi-Tool 

Knife_SHELL_1.stl

A fun holder inspired by Victorinox's iconic foldable knives, perfect for phones, tablets, cards, and more! I designed this for my dad, who has an incredible collection and is obsessed with these knives.

Assembly video:
https://youtu.be/3WIK09I4kvM

Features:

Comes in 4 Parts: The set includes a body, two sides, and a logo. The sides snap into the body, and the logo snaps into the front.

Full assembled model in 1 file also included.

Easy Assembly: No additional tools required; everything snaps together.


3D PRINTING SETTINGS
Files are oriented to print without supports.
The "cork remover" helix part needs lots of part cooling to print successfully without supports so crank the fan to 100% and if your printer has an auxiliary fan go for it!
0.02 layer height, 20% infill,
This was printed and tested in a Creality K1 printer.

SWISS ARMY KNIFE PHONE HOLDER

SWISSKNIFE-FULLMODEL.stl

With this tier you get:

- License to sell 3D prints of my models.
- Full access to exclusive members-only models.
- Monthly updates with new designs tailored for enthusiasts and professionals.
- Priority support and feedback opportunities on upcoming projects.


Thanks for your support! 

Jt40

Achievements

Seedling

Up and Coming

Explorer

Pinned models

FOLDX Basic Kit - Customizable Foldable Multi-Tool

FoldX - Foldable multi-tool -Double and Triple tool-head holder

FoldX - Foldable multi-tool - Screwdriver bit tool

FoldX - Foldable Multi-Tool - Mini Pliers Tool-head

FOLDX - Foldable Multi-Tool - Mini Caliper Tool-head

Foldx

FoldX - Foldable Multi-Tool - Mini Pliers Tool-head

FoldX - Foldable multi-tool - Screwdriver bit tool

FoldX - Foldable multi-tool -Double and Triple tool-head holder

FoldX - Foldable multi-tool - Grip Shell

Ergo Utility Knife/Blade Holder w/sheath

Carry holster / sheath for Foldable Multi-tool v2

The Legend of Zelda shell for V2 Foldable Multi-tool.

FOLDX Basic Kit - Customizable Foldable Multi-Tool

SWISS ARMY KNIFE PHONE HOLDER