Universal nevermore v5 duo mount. Apply a small dab of super glue or VHB tape to the mount, and install it in any printer.

Slicer settings
MATERIAL-ASA
Nozzle-0.4mm
LAYER HEIGHT-0.2mm
INFILL TYPE-Grid, Gyroid, Honeycomb, Triangle or Cubic
INFILL PERCENTAGE-30%
WALL COUNT-3
TOP/BOTTOM LAYER-3

Required hardware one M3 heat set insert.

Universal nevermore v5 duo mount.stl

I made this tool to help install magnets in the correct  orientation, it is very frustrating when you accidently glue a magnet in backwards when it is supposed to attract to another.

Place a magnet on the bottom of the tool with the + side up. Press the magnet into the corresponding pocket, then place another magnet on the plus side and press it into the joining part. I found the tool useful when assembling my Nevermore v5 duo carbon filter.

Required hardware 
1 6x3 neodymium magnet

Slicer settings
MATERIAL-PLA
Nozzle-0.4mm
LAYER HEIGHT-0.2mm
INFILL TYPE-Grid
INFILL PERCENTAGE-25%
WALL COUNT-2
TOP/BOTTOM LAYER-3

Add a pause after layer 19(3.80mm) to install the magnet, and optionally change the filament color. I recommend installing the magnet with the north polarity facing upward. If you have a compass you can find the polarity of a magnet.



Magnet installation tool 6x3.stl

Customize by adding text and printing multi color.

Name tag template.stl

Name tag template .stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

JD_3D

Achievements

Seedling

Pinned models

Magnet installation tool 6x3.stl

Universal nevermore v5 duo mount.stl

Magnet installation tool 6x3.stl

Name tag template.stl