4 Color HueForge model. Stormtrooper filament painting made using Sunlu PLA+ colours.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Sunlu PLA+ Grey Transmission Distance: 2 PLA Sunlu PLA+ Silver Transmission Distance: 2 PLA Sunlu PLA+ White Transmission Distance: 8
Swap Instructions: Black until layer #6 at 0.56mm Grey until layer #8 at 0.72mm Silver until layer #9 at 0.8mm White for the rest.
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice.
Use the exact numbers in your slicer to match up properly.
3 different size models are supplied and designed to print with 0.4 nozzle
If re-scaling model make sure not to alter the Z height of the model
ALL Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.