multi-Colour HueForge model. Lord of the rings - Triptych style filament painting made using Sunlu and Esun PLA+ colours.

Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear)

LOR - The Green Tree

Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Esun PLA+ Pine Green Transmission Distance: 2.5 PLA Sunlu PLA+ Grass Green Transmission Distance: 2.5 PLA Sunlu PLA Green Transmission Distance: 10 PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions: Black until layer #5 at 0.48mm Pine Green until layer #6 at 0.56mm Grass Green until layer #8 at 0.72mm Green until layer #9 at 0.8mm White for the rest.

LOR - The Blue Tower

Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Esun PLA+ Dark Blue Transmission Distance: 2.5 PLA Sunlu PLA+ Blue Transmission Distance: 3.5 PLA Esun PLA+ Space Blue Transmission Distance: 3 PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions: Black until layer #5 at 0.48mm Dark Blue until layer #7 at 0.64mm Blue until layer #9 at 0.8mm Space Blue until layer #12 at 1.04mm White for the rest.

LOR - The Red Volcano

Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Esun PLA+ Fire Engine Red Transmission Distance: 5 PLA Esun PLA+ Magenta Transmission Distance: 6 PLA Sunlu PLA+ Skin Transmission Distance: 7 PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions: Black until layer #5 at 0.48mm Fire Engine Red until layer #6 at 0.56mm Magenta until layer #7 at 0.64mm Skin until layer #8 at 0.72mm White for the rest.

This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice.

Use the exact numbers in your slicer to match up properly.

If re-scaling model make sure not to alter the Z height of the model

ALL Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.