7 Color HueForge model. 'Japanese Stylize' filament painting made using Sunlu and Esun Pla+ filaments.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Sunlu PLA+ Grey Transmission Distance: 2 PLA Sunlu PLA+ Red Transmission Distance: 6 PLA Esun PLA+ Pink Transmission Distance: 8 PLA Sunlu PLA+ Skin Transmission Distance: 6 PLA Esun PLA+ Bone White Transmission Distance: 4 PLA Sunlu PLA+ White Transmission Distance: 6
Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Grey At layer #6 (0.56mm) swap to Red At layer #7 (0.64mm) swap to Pink At layer #9 (0.8mm) swap to Skin At layer #10 (0.88mm) swap to Bone White At layer #15 (1.28mm) swap to White for the rest.
This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results.
Use the exact numbers in your slicer to match up properly.
Two different size models are supplied and designed to print with 0.4 nozzle
If re-scaling model make sure not to alter the Z height of the model
ALL Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.