Gorilla - Pop Art Style (Filament Painting)

7 Color HueForge model. 'Gorilla - Pop Art Style' filament painting made using Bambu Pla Matte filaments.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

(I recommend the following speed settings for the Bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)

Filaments Used: PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6 PLA Bambu PLA Matte Dark Blue Transmission Distance: 1 PLA Bambu PLA Matte Marine Blue Transmission Distance: 2 PLA Bambu PLA Matte Ice Blue Transmission Distance: 3.5 PLA Bambu PLA Matte Scarlet Red Transmission Distance: 2 PLA Bambu PLA Matte Lemon Yellow Transmission Distance: 4 PLA Bambu PLA Matte Ivory White Transmission Distance: 4

Swap Instructions: Start with Charcoal At layer #8 (0.44mm) swap to Dark Blue At layer #9 (0.48mm) swap to Marine Blue At layer #10 (0.52mm) swap to Ice Blue At layer #12 (0.6mm) swap to Scarlet Red At layer #16 (0.76mm) swap to Lemon Yellow At layer #19 (0.88mm) swap to Ivory White for the rest.

This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results as this print uses mostly very low td filaments

Use the exact numbers in your slicer to match up properly.

Two different size models are supplied and designed to print with 0.4 nozzle

If re-scaling model make sure not to alter the Z height of the model

ALL Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.