Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4172164.

Took the model and made it into a coat hanger for my nephew.

Rhino coat hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4338728.

rescaled the design to make the letters stand out more

original design is https://www.thingiverse.com/thing:4335919

0 fucks coin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4797076.

I modified the beautiful original model to use an acrylic pipe instead of a bottle (outer diameter:90mm, inner diameter:86mm) and reduced the size of the tray to reduce the overall footprint and accomodate a smaller buildplate.

I further altered https://www.thingiverse.com/thing:3552343 to replace the knight statue (resin print intended).

I was not please with the columns on the mini tray coming from my FDM machine so i reprinted just the colums (and appendant rails) in resin.

Another dice tower (acrylic pipe and cthulu statue)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4812295.

I liked the original, but i thought there is room for improvement (at least for my application of it):

This remix features:

-slimmed down signs and base to save some material and time (also it looks less bulky on the office door).

-slightly recessed text and icons on the tiles to reduce surface damage (can now be painted without rubbing off so easily)

-base intendes for 4 tiles (i needed only 4)

-cutout on the bottom of the base (original, slim and slim for 4 tiles) for easier to access the stored tiles

-blank icon tiles so you cann add your custom text to it

-a completely blank tile (i intend to stick postits with custom notes on it)

-4 tiles in german language

Office Door Availability Signs (slimmer, easier access)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4056769.

This holder is designed to hold dropper bottles used by the company "thearmypainter". The bottles have an outer diameter of 25mm.

I originally designed a simple 6 bottle holder but then i thought "why not customizable?".

So here it is: The first thing i ever made in OpenSCAD. Enjoy.

Warpaint bottle holder (customizable)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4691420.

On my case "Fractal Design Define Mini C" the reset and power button are on top so pretty endangered to be pushed by cats and the like. So i designed a clap to protect the switches and Ports from accidently being engaged by a cat that sits/lies/stretches on my case.

Use 2 of  these https://www.thingiverse.com/thing:4117540 to mount to the case, enjoy.

Fractal Design Define Mini C Button Guard

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4851649.

A nut holder I made for a co-worker to keep them in order in his bike toolkit.
It holds four hex nuts (13,10,8 and 7mm) and the drill adapter.

Bicycle nut holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4137112.

Scaled it down a bit and added a hole in the corner for easier use on suboptimal edges.

Small L-Square

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3671562.

A clip to fix the far end of my 3.5mm jack extension cable to the underside of my desk using some double sided tape.
The jack has a diameter of 9mm and fits nice and tight.

3.5mm jack extension clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4117540.

A small hinge i quickshotted for a friend to use in a cosplay project.
Simply print 2 and use a piece of 1.75mm filament as a hinge pin.
I recommend fixing on end of the pin to the hinge by using a welding iron or a small dap of crazy glue.

Small Hinge (filament as hingepin)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4598208.

A simplistic holder i made for a friend so he can stick it to the back of his TV.

FireTV Stick Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3902605.

Replacement wings for one of my goddaughters MLP figures.
The original wings were made out of cardboard that were tucked between two plastic fins on the back of the figure and as you can guess didn't hold up too well.

My little pony replacement wings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3901971.

Simple wedge design to achieve two things:
-keep tilted windows from banging shut on a windy day
-keep pets that try to climb though the window (and fail) from getting pinched to death in the window side

Window stopper wedge for tilted windows

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4934551.

Great design!

I modded the hooks to 65mm length to fit my seats.

Seatback Hook (no supports, 65mm hook)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4861362.

I raised the base a little bit so that both feet have contact to it.



All credits for this nice model go to jayadan.

Private Johann - Fleeing Infantryman (easier print)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4897439.

I designed this to prevent the air from going straight down into the vacuum chamber when repressurizing.

Vacuum Chamber Air Spreader (1/4")

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4210741.

A cap to mount a 3l Jack bottle to a board and feed wires for some lighting through.
Should fit other bottles with the same thread, too.
I printed some of them in PLA, fit perfectly and are securely holding the bottles.

Jack Lamp Bottle Cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3671581.

Replacement parts for the magnetic locks on the cover of a vaillant gas heater.

Magnet lock replacement

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4226982.

A set of tokens for the german bar game "Schocken" (a so called "Schockbesteck") i just threw together for my brother in law.

Simply print the base and cap and 14 disks (mark one of them or print in different color). I recommend rethreading bot cap and base with M12 (that's how i did it) or scaling the cap up a little in x/y.

The rules
====================

(thanks to https://h2g2.com/edited_entry/A593183):

The game Schock is a very popular game of dice in the pubs and bars of Germany. There are many variants of the game (and an infinite number of names for it) and nearly as many sets of 'house rules', as there are pubs, so we'll focus on the basics first.

Prerequisites
---------------------

For a game of Schock it takes two or more people, three dice (three dice and a dice cup if you play "blind" variant) and 13 deckel ('beer mats'). These are small pieces of cardboard, which are usually placed under the glasses in German pubs. One can replace these deckel with chips, sticks or even anchovies, but the deckel are common, because they are left around in abundance.

In the Beginning...
---------------------

Select someone to begin the game. Each player throws one single die. The one who gets the highest number first begins the Aufnahme ('take up'). He throws the three dice and decides what to do, either throwing the dice three times to build one of the combinations below, which count. However, if he decides to take a second or third throw, he is only allowed to leave dice out of the shaker which show a one (There is one exception - if a throw results in two sixes, you are allowed to turn one of them into a one. If you happen to throw a bock (three results the same) of sixes, you are allowed to turn two of them into ones, making your next throw a predefined schock.). Each combination beats the ones above it in the list, and is beaten by the ones below in the list.

What the Numbers Mean...
---------------------

The combinations are, in ascending order:
+ **A bare number** - Combinations which do not appear below, are counted from the highest digit to the lowest and are then compared to each other. The highest number wins. So a throw with a five, a four and a two is counted as 542.

+ **A 'Street'** - These are three dice which form an ascending row, like one-two-three (3,2,1) or four-five-six (6,5,4). The highest digit defines the ranking of two streets in comparison. A street only counts when it comes from a single throw.

+ **A bock or pasch** - These are three dice which show the same number. Like the street, this only counts when it comes from a single throw (remember that only ones are left out of the cup in subsequent throws).

+ **A schock** - The highest class of combination. These are combinations of two ones and any other number. These are called schock-2 to schock-6 according to the final number. The highest possible schock is schock aus ('shock out'), which consists of three ones. Whoever throws a schock aus is out of the round and can watch the show.

And the Winner is...
---------------------

Every round has one definite winner. If two players throw the same combination, the one who threw it first wins. The only exception is, that a combination which resulted from a single throw with three dice has a higher ranking than one which took several attempts to complete. In addition, the number of throws determines the ranking; the less throws you make, the higher your ranking.
Play

Every player throws the dice in turn, but everyone has only as many tries as the first player took. At the end of the round, the results are compared. The lowest combination loses and this player gets as many deckel as the highest picture dictates; a bare number gives one deckel, a 'street' two, a bock three and a schock as many as his name implies. In case of a schock aus, the second highest combination determines the number of deckel that the loser has to take.

The loser begins the next round and the game goes on, until no further deckel are on the stack. After all deckel have been taken, the game goes into the second phase, the Ablage ('take off'). The rules are the same, with two exceptions; the players without any deckel are out of the game and since there are no pieces on the stack anymore, the winner of a round hands out the appropriate number of deckel to the loser, until he has none left. Then he is out of the game too.
This is the End...

The game ends, when only one player with deckel is left. He is the loser of the game. Depending on the 'house rules', he 'takes a half', meaning he takes half a deckel (that's what the marked/colored disc is for. If a player gets his second 'half', he is obliged to buy the other players a drink. A new game can begin, with the loser as the predefined beginner.

As one can imagine, this can get quite expensive with large groups. Therefore, games with more than five people are very rare. On the other hand, when only two people are playing, it is very fast. In such situations, it's played on 'thirds', meaning, you have to accumulate three losses to lose a game.

Variant
---------------------

A much-loved variant is the 'blind' schock. Every player has his own cup and his own dice. You throw the dice and if you decide to raise the cup, you have to throw them again (up to three throws). When all players have made their throws, the cups are raised. The term 'blind' is given because, if you leave the cup on the table to indicate that you think that you've had enough throws, no one, including you, actually knows your ranking until the end of the turn. It's a typical 'showdown' situation. This variant is very hard and fast.

This is just one of many variants...

Schock Set / Schockbesteck

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4532210.

A set of rotation indicators i made for testing NEMA17 motors and control systems in the comfort of my desktop before attaching them to the actual ball shafts.

The motors i use have a 5mm shaft.

The indicators can be stuck on without any means of fastening, the friction fit is enough to allow the intent use and removal afterwards without any hassle.

Indicators for Stepper Motor Tests

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4493868.

An under desk mount i designed for the Lenovo ThinkPad USB-C Dock Gen 2.
When mounted at the desks edge the power button will protude and is perfectly reachable.
The USB Ports and the audio jack are accesible from the front. 
If mounted correctly (in my case about 60mm from the front edge) the position of the audio jack protects it from being bent/damaged while providing enough cable slack for comfortable use.
The dock is kept from sliding out by the cables connected to the back side.

Under Desk Mount for Lenovo ThinkPad USB-C Dock Gen 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3488820.

Remixed the original to fit the standard BIC ballpens i use at work.
Takes a lot of strain from the hands if you do a lot of handwriting.

BIC ballpen grip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4745884.

I consolidated the parts an relocated the nub that prevents the ring vom sliding off.

Great design by Kerrybg.


pelican hook (consolidated parts)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4285566.

Separated the Frame into two pieces to print without any support.
I also reduced the gap for the note to make a tighter fit.

edit (Apr, 15): added face version with latches to make alignment of the stand easier

Post-It-Note Frame (2 parts)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3377900.

Not really a remix, i just separated the rattle itself from the spheres.

All credit for this awesome thing go to the original author.

Skull & Bone Baby Rattle (separate files)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3532409.

Based on the famous LOVE sculpture by Robert Indiana i made a HOPE sculpture as a wedding decoration.

HOPE sculpture

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3902107.

Separated the files for more convenient printing.
Also added a version with the text cut out of the lid instead of being embossed.

Skip-Bo Snap Case seperated parts and cutout lid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3726808.

Inspired by Marks great design i remodeled the game holder to hold the games from behind so it will be invisible on the shelf. Also i reduces the size wich brought print time down dramatically and is more suitable for smaller printers.

Nintendo Switch invisible game holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4885567.

A simplistic shelf for our IKEA malm i came up with to put my e-reader, glasses and phone onto at night.

The upper and lower board can be any 3mm material you like measuring 210mm x 107mm
for the upper board and 210mm x 140mm for the lower one.

For assembly simply glue the upper board(grey), upperborder(red) and crosspiece(blue) together. Then slip over the bed's sideframe and insert the lower board.

The drawer beneath should still be functional.

IKEA Malm side shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4827462.

A quick marker i whipped up to mark where a removed piece of literature (be it books, comics or anything else) belongs or where to continue to read a series.

Imperial Bookshelf Marker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3629310.

The original of Zdolshin was hollow but i needed a solid D12.

Blank D12 solid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3540044.

Replacement toothpick for a swiss army knife. Mirrored the original because for my knife the headshape was for the wrong side.

Pocket knife replacement toothpick

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4679788.

reduced the material usage and print time by a fair amount

Mars 2 Pro Vat Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3754022.

I modeled a spool used by the filament brand Nextpage in order to make designing parts like drawers a lot easier.

The netto weight of the original spool is 156g.

Nextpage Filament spool

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3783610.

Thing i made some time ago to hold a micro SD card and the accompaning USB adapter neatly in reach on ther corner of my monitor.

Of course it can be used to hold an USB stick instead of the adapter ;-)

Just use a little double sided tape to stick it to the corner.

USB adapter and micro SD card holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4135444.

Since i got my S8+ the stand i used for my S7 (https://www.thingiverse.com/thing:2744960) is not fitting anymore (qi plate too low).
So inspired by the old stand i designed something very similar, only fitting for my S8+.

Should work for other phones of similar size just fine.

The fit for the Anker "PowerPort Qi" plate is pretty exact, there is no force involved in putting it in and it does not move at all inside the stand. If you want a more snug fit i suggest scaling down to 99% or something like that.

Qi smartphone stand for Anker PowerPort Qi plate (fits Samsung Galaxy S8+ and similar)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4493720.

I simplified the adapter and raised the hotend position a little. 
Fits great on my Cr-10 and Anet A8.

E3D Quick change adapter (simplified)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3456117.

I designed this to position the extruder of my A8 above the display as i wanetd to mount the spool holder on the wall behind the printer.

Printed the first test in .3mm resolution (see pictures) but the part fittet so nice that i kept it.

Depending on the screws holding your display you might need new ones. I recommend 35mm thread length if you want to keep the acrylic backplate of the display. If you won't keep it on then 30mm will do.

Anet A8 vertical bowden mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4630806.

I took inspiration from philphilphil's design and redrew the whole shebang.
My goal was to reduce footprint, printtime and Material usage.

Haven't found time to testprint yet i'll get to that next week (hopefully).

Sword and Sorcery Hero Dashboard Light

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4172181.

Took the model and made it into a coat hanger for my nephew.

Hippo coat hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3613232.

A mount to add a BL Touch or 3D Touch sensor to the printsled of the Geeetech MeCreator 2. The holes match the ones for the screws securing the front bearings. I recommend longer screws though.

3D Touch /BL Touch mount for Geeetech MeCreator 2 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3422768.

I saw Z123456789's clamp for 2020 Profiles and it inspired me to make one alike it for the 4040 profiles i'm using on a project.

I recommend printing with 100% infill for stability. The first time twisting it in is quite hard but that way it's a nice tight fit.

Twist In Cable Clamp [4040 Aluminium Profile]

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3735579.

Scaled up to fit the standard Busheng 17HD40005 Nema motor.

Wind up key (scaled up to fit 17HD40005)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4154574.

Remixed the chain ends to let it run behind the z-rods because i needed more space above my hotend. Works fine so far.

improved linear chain to Extruder on Anet A8 behind z-rods

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3456100.

Changed the fitting hole to accept 5mm round motor shafts.

I use it to visualize motor movement in a test system.

Wind up key stepper spinner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5012103.

I love the original design, I just made it slightly larger (20mm) to accomodate slightly thicker tea packets.

Tea Dispenser (top-mounted) slightly larger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4215112.

Made the two halves into one solid.

Heart of TeFiti solid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3767209.

Rezised the retainer and made the eyelet a little sturdier.

Barcode Keyfob

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4269406.

I fixed the misaligned hingepin and reduced hinge width by a small amount.

update 2nd feb 2021: Added a version with a lever that makes it easier to open the clamp in hard to access positions

Cable Organizer with better "Clip" *fixed*

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5144444.

I made ifixcpu's sweet design one solid piece.
Prints upright without support.

DnD Dice Sword D20 Pommel (solid)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

HeavyMetalGuy