Members get exclusive access to my multicolor-print-ready files.

FREE for a limited time! I'm only able to do this with the help of my Membership Supporters! Thank you Craftys!.

Printing

• Use the default "download model" button to get my original files where the head can be printed separately.
• I design these models for resin printing, but most parts print fine on standard or smaller FDM nozzles.
• When printing in resin, I print the base solid, and hollow the figure. The body at 2.5mm, and the head at 1.8mm.
• For filament printers, if the part has a flat part, put that on the buildplate, otherwise, it's best to raise it by 5mm and print the whole thing on auto Tree supports. For this little Merc, I printed the base, and the explosion flat (though the explosion still needs some support) for the body, head, and swords, I printed to models fully on tree supports.

Assemble and Swap

• Use 6x2mm Magnets in the base, feet, neck, and head.
• The swords on his back do need to be glued in place, but it's pretty easy to align.
• The neck dimensions are the same on all of my Li'l Crafty figures, so the Heads should be interchangeable.

Share and Enjoy

• Please ❤️ the model if you print it.
• Share your print and paint jobs with me by posting makes here, or tagging My Social Links