This Pill Box;
- Hinged,
- Print in Place print - No need any assembly,
- Secured snap lid,
- has 7 Days Compartment.
Dimensions are; 70mm diameter and 25mm height. You may send a message if you want bigger or smaller size.
The box will be printed less then 2h and weight is 35gr.
Hinge Design:
- It's regular hinge for print in place design.
- Every lid for each compartment has flexibility to move individually.
- There is tight tolerance (0.2 mm).
Secured Snap Lid: Generally it's easy to open. But sometimes it's hard to open due to small opening in the middle for your finger. I use bottom side of the box and put my finger from to push the lid instead of pull from top side.
Category:
0 Likes0 DownloadsAugust 25, 2024
0 Likes0 DownloadsAugust 25, 2024
Instructions
Filament • 0.08mm
MaterialPLA
Layer height0.08 mm
Infill density15 %
SupportsNone
BrimYes
SeamRandom