My take on a deconstructed Christmas tree that uses a lot of bridging!

Printing Tips If you use supports, make sure they don't interfere with the bridges! The strings are designed to be printed with a 0.4mm diameter nozzle and 0.3mm layer height, so changing their size may affect the print. If you're interested in a scaled up version, just let me know and I'd be happy to put one together!

Here are some other recommended settings to use if you re-slice:

• Wipe while retracting - Enabled
• Detect bridging perimeters - Enabled
• Seam position - Nearest
• Bridge speed - < 5mm/s

Also, I recommend using a higher nozzle temperature for the tree trunk to help the hoops droop some more. I just manually changed the temperature to 230C at the start of the print and turned it back down to 210 - 215C when I changed colors.

Please like it if you do and leave any comments! If you're really feeling generous please consider buying me a coffee so I can keep creating!

Check out my TikTok!

Check out my YouTube!

If you like what you see, please consider joining my Patreon.