This is a fun and cute Strawberry hanging lamp.
It is made for use with a hanging light cord. You can get a 2 pack of the cords with toggle switch from amazon for under $20. Cable Matters makes them. There are some other manufacturers as well.
IMPORTANT: You must use an E26 standard light bulb that is no more than 9W.
I like the color changing ones that come with a remote. You can get those cheaply. I got one at a local dollar store for about $4.
To assemble you just press the light socket into the stem, line up the hull and screw the stem onto the berry. That's it!
Members get access to my premium files and authorization to use the prints commercially.
I recommend printing the berry and hull upside down with a raft or brim and tree support touching buildplate at 75 degrees.
The stem should be fine without supports and around 10-15% infill.