tracking pixel
Colby G

Venus Flytrap Snack Clips

by
ForgeCore
Follow
Follow
Remix Model
ForgeCore
ForgeCore
Image 1 of 16
Venus Flytrap Snack Clips 3d model
2D
3D
Makes
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips - That's genious! I rushed to print a test and it works like charm! Printing the rest now! - 3d model
Venus Flytrap Snack Clips - Love how it turned out! - 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips - Im having trouble with the bottom of my clip. Can any 1 help? - 3d model
Venus Flytrap Snack Clips - Here is my first make! Not too shabby. I printed the base with zero infill and no top layers so I could add the rocks. I'll probably modify the file so I can print with a solid top just recessed to use less rocks next time. Also used a Dremel to notch the traps so the latch has something to bite onto. Has a nice satisfying snap sound now when engaging the lock. - 3d model
Venus Flytrap Snack Clips 3d model
Venus Flytrap Snack Clips - Rawr!! - 3d model
Venus Flytrap Snack Clips 3d model
489 Likes1.6K DownloadsApril 10, 2024


The Venus Snack Trap! This plant is perfect for displaying in your kitchen so you always have bag clips available.

I designed this to resemble the Venus Flytrap plant as closely as possible while still being functional.

To print this, make sure your printer is calibrated well. The gaps are 0.2mm so you'll have to be sure your printer can handle those tolerances.

I printed the traps on their side using tree supports which remove fairly easily

Assembly:

  1. Remove supports from traps
  2. Break the locking tab and mouth free (I used a flathead screwdriver)
  3. Glue inner mouth pieces into flytrap using glue of choice. Make sure all supports are cleaned off the traps, especially inside the holes.
  4. Stick Stems into base, bend to get desires look (use heat gun to bend easier)
  5. Stick traps onto stems. No need to push them all the way on.
  6. Enjoy! To use your traps, snap them onto a bag, and then lock them shut using the locking tab. If you have a hard time getting yours to lock, use it a few times to wear it in.

Filament used: Green plant color: Overture Olive Green PLA

Red mouth color: GiantArm Matte Terracotta PLA


489 Likes1.6K DownloadsApril 10, 2024




489 Likes1.6K DownloadsApril 10, 2024