**Mushroom hangers** to give your space a bit more color and make it fun!

I designed these 6 mushrooms that serve as hangers for your coats.
You simply screw the head to the stem and slide it onto the little bracket mounted to the wall with a single screw.
You can print them with Pla with no problem since the weights they are destined to are not heavy.

I advise to **print the stem at a 45° degree angle** with the screw touching the build plate and auto-generated supports. This will allow a smooth print and the stem will be perfectly smooth.

All the filaments I used are Polyterra PLA from Polymaker

Mushroom hangers

Mushroom hangers.3mf

Dots.stl

Mushroom hangers 2.3mf

Punched.stl

Stem.stl

Wall mount.stl

Wavy.stl

Rest and charge your phone in a zen way with the **Bonsai magsafe charger**

I designed this model inspired by the beautiful aestethics of bonsais. While being very figurative, it's also zen and minimal.
Place your phone under the tree in the wavy sand to charge it.

As always, I tried to keep the mounting process very straightforward and quick.
The feet are optional and can be attached with a bit of glue.

All the filaments I used are Polyterra PLA from Polymaker


Bonsai magsafe charger

Bonsai.3mf

The **spinning burger keychain** is here and it's modular!

Have fun with this little keychain that you compose to your liking and assemble in under a minute.
The only part that requires some time to print is the top bun if you choose to make it multicolor. In this case I advise to print it at _0.08mm layer height_ for best results.

Find the attached .stl files and the .3mf for BambuStudio.

All the filaments I used are Polyterra PLA from Polymaker

Enjoy!

Modular spinning burger keychain

Burger_keychain.3mf

The **Pencil case** that opens by squeezing it!

This case for your pens and pencil (and more) is a great addition to your bag or desk. It's pretty large, so it contains a lot of supplies. You can also differentiate by putting some in the eraser. Finally, there's a hidden compartment in the tip.

Each part is separate and very easy to print. The only piece that needs a few supports is the head of the pencil.
The head and the tip need to be printed upside down and ideally with a brim.
Finally, you insert a _1.75mm piece of filament_ in the pencil head and body joints.

All the filaments I used are Polyterra PLA from Polymaker


Pencil case

Pencil case.3mf

The **clicky Hosomaki keychain** is here!

This model is perfect for all the sushi lovers that want to bring some with them all the time. And the best part is that it clicks!
Very easy to print with a multicolor machine, but I've designed a version for one-color printing too, it just needs a little glue for the bottom part.
You'll need a [spring](https://www.amazon.com/Mini-Skater-Stainless-Compression-Assortment/dp/B07CVBBQPT/ref=sr_1_16?dib=eyJ2IjoiMSJ9.awv35dWAscA2zftV5FFY9JdQ6HnmoDOCH0CC5KxRM8qK8-cKT8MjQ-xkv-2H5J51RDCipvacYkgMUZZXd-ql5RGUwEkOBm7mHYXrrqnMBG9Og0X1BZp8ODVdViY-bYHCsJoaJTsaotzmrXM2ZQkkSAuazzlqLxJymCbFzzcBYSmHVdPWPwpG71RLZFPSwLscwJDtE6WYAR2bvv1BUKbLQCOv5iGW_cttbYZZ7RgZNQw.z_Q7_qQZx6HIWDNtdBD8YbV4jl-VEkSythbiYsBl7RY&dib_tag=se&keywords=spring+0%2C2+x1.5+inch&qid=1724054484&sr=8-16) for it to work.

**MOUNTING PROCESS**

- Insert the spring in "Rotating part"
- Insert the rotating part in "Button"
- Insert the two assembled part in "Top rice"
- Screw it to "Algae"

Enjoy!

Clicky Hosomaki keychain

Hosomaki keychain.3mf

Button.stl

The **spinning pizza centerpiece** and its toppings which can be used as coasters!

**This is a big item and requires a large printer with a bed at least 40x40 cm**

The assembly is very straightforward and quick, you can use glue in the magnets' holes or just push them in with a bit of force and they should stay in. You'll need 18 [magnets size 8x3mm](https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXJ9QXK/ref=sr_1_2_sspa?crid=E9A9J6X3F9IK&dib=eyJ2IjoiMSJ9.OXNfe5gUVKRvm6aouL_sR6XFHJQ15w0xbm1VnXoBLjjGl8F0oVp0jpuDHTijN05W-d4iwuPAqzpsUWsXqQW0CggQEjBh8ftSdjscy6IyitzNmjgzidKfLRoLRYxIfIM1HFKPXTHZm53Ni6EHKrLaRVnHLEH9Bqw7q_Z4nrBO1lgca04YtWyqIybf9DY9b8m7mclwEit5Sn3_M0x_b8rvpusKUFuXv25qYl6aw-ZxYzw.ud35gK-wIHwRQ5e_SaHG3ZaSYZiVjnCw-1Zg6uTEteI&dib_tag=se&keywords=magnets%2B8x3&qid=1723470678&sprefix=magnets%2B8x3%2Caps%2C153&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1) and the print weighs about 900g.

Pepperoni and tomato coasters can be printed with AMS or with one color, there's a folder containing the .3mf files you can use in Bambu Studio.

Among the files you can find a .pdf named "Instructions" with the infos about the various parts and the print settings I used to minimize the amount of filament used while ensuring the centerpiece rotates smoothly.
Scroll through the pics to see how to assemble it.

All the filaments I used are from Polymaker

Pizza lazy susan

Toppings.3mf

Inspired by the Moai statues I decided to model my own version and plant them in my garden as if there were actually some Moai statues buried in the ground with some pretty unique hairstyles and a variety of facial expressions.

The ones you see in the pictures are open, meaning that they don't have a bottom, but there's also the closed version in case you want to use them as traditional plant pots.

There are seven of them for now, maybe I'll expand the collection further

Moai plant pots

Moai pots.3mf

**↓**  Instant access to the whole catalog
**$**  Commercial License

Download and print every item in the catalog. You also have a a **commercial license** to sell the prints.

**Selling and or Distributing any of the files in this catalog is strictly prohibited**

Select Annual billing for 20% off!

Maker & Seller

Designing 3D printable cartoonish objects with functionality

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Filament Toons

Achievements

Seedling