Just a quick remix to convert Eastman's Deadpool bust into a planter, including a drain hole in the back. Multicolor options for Bambu are available on MarkerWorld

[ https://makerworld.com/en/models/434071]( https://makerworld.com/en/models/434071)


Original model - [https://www.printables.com/model/36689-deadpool-bust-remastered-supportless-edition-stl](https://www.printables.com/model/36689-deadpool-bust-remastered-supportless-edition-stl)

Deadpool Planter - No Supports

Deapool Planter.stl

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

- Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

- Swap Instructions:
	Start with Black
	At layer #5 (0.48mm) swap to Grey
	At layer #10 (0.88mm) swap to Silver
	At layer #13 (1.12mm) swap to White for the rest.


HueForge - Wall Art - "Fractured Memories"

Fractured Memories.3mf

We only have so much wall space, so here are a couple of options to store your HueForge prints when not on display. Created in the most commonly used sizes, 100x100 & 200x200. For those of you with a HueForge commercial license, these would work well for sorting and displaying your prints at shows and markets. This is a very simplistic model that does not need supports. I've had prints scattered everywhere as of lately, so I created a viable option for myself. Hope you enjoy.

100x100 - Can store up to 25 prints, up to 3mm in thickness.

200x200 - Can Store up to 37 prints, up to 3mm in thickness.

200x200 Less Filament - 70% filament savings by reducing height and adding holes

HueForge Storage Box

HFSB - 100x100.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

- Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

- Swap Instructions:
	Start with Black
	At layer #7 (0.64mm) swap to Grey
	At layer #10 (0.88mm) swap to Silver
	At layer #15 (1.28mm) swap to White for the rest.

**Looking for a storage solution for your HueForge prints?  Check out my Storage Boxes here → [https://makerworld.com/en/models/379912](url)
**



HueForge - Wall Art - "Intergalactic Travel"

AOI2.3mf

This might be the most basic of models ever created. Simply put, I wanted to mount my caliper beneath a shelf in my office for quick access. Most of what I found online were for attaching to pegboards. Enter the caliper sheath which is minimal design, with quick print, and low filament usage. Attach with double sided tape, or use provided legs for mounting with screws. No supports needed, bridging will take care of the top without issue.

Designed for the 6" version found here → https://www.amazon.com/dp/B07DFFYCXS
But should fit many variants.



Caliper Sheath Mount

Caliper Sheath - Sliced.3mf

_The final installment of this series._

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Silver
At layer #18 (1.52mm) swap to White for the rest.

HueForge - Wall Art - "Twisted Expressions"

Twisted Expressions.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

- Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

- Swap Instructions:
	Start with Black
	At layer #7 (0.64mm) swap to Gray
	At layer #12 (1.04mm) swap to Silver
	At layer #18 (1.52mm) swap to White for the rest.


HueForge - Wall Art - "Space Bound"

Space Bound.3mf

Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm

- Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

- Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #9 (0.8mm) swap to Silver
At layer #12 (1.04mm) swap to White for the rest.

HueForge - Wall Art - "Fragile"

Fragile.3mf

Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm

- Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

- Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #8 (0.72mm) swap to Silver
At layer #9 (0.8mm) swap to White for the rest.

HueForge - Wall Art - "Dapper Dan"

Dapper Dan.3mf

Jake the dog from the TV show Adventure Time transformed into an articulated snake. No supports needed.

Multicolor version available on MakerWorld

https://makerworld.com/en/models/213206

Flexi - "Jake the Snake"

Jake the Snake - Sliced.3mf

Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm

Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Grey
	At layer #14 (1.2mm) swap to Silver
	At layer #20 (1.68mm) swap to White for the rest.


HueForge - Elegant Screams

Elegant Screams - Sliced.3mf

This Robocop bust was modeled by Wekster on Printables. All credit goes to him. Go check out his other amazing creations.

I've painted this model in Bambu Studio to save you all the time and hassle. Flushing volumes optimized for less filament waste. Print with your own desired settings, or those that I've provided.

Robocop - Multicolor

Robocop - Multicolor.3mf

I present to you the West Coast legend in sea creature form, 2pactopus.

 

“Dear Mama”, I made these “Changes” from the original McGybeer articulating octopus. “How Do You Want It?" Give this 2pactopus a print and show your “California Love”. Say a “Hail Mary”, and then “Hit ‘Em Up”. If you decide not to, just remember; “I Ain’t Mad at Cha”.

 

Ps: Be careful when removing the supports from the tips of the bandana. :)

 

**Multicolor version available on MakerWorld
**
[https://makerworld.com/en/models/192497](https://makerworld.com/en/models/192497)

2pactopus - Articulating

2pactopus - Sliced.3mf

This Hulk bust was modeled by Eastman on Printables. All credit goes to him. Go check out his other amazing creations.

 

I've painted this model in Bambu Studio to save any of you wanting to print this in multicolor, the time and hassle. Flushing volumes optimized for less filament waste. Print with your own desired settings, or those that I've provided. No supports necessary. Includes display stand for the bust.

Hulk Bust - Multicolor - No Supports

Hulk - Multicolor.3mf

A quick print for a last minute Valentines Day gift, or any other occasions.

Love Silhouette - Display Stand

Love Silhouette - Sliced.3mf

In honor of country music legend, Toby Keith, who passed away this morning.

Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm

- Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

- Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Grey
	At layer #15 (1.28mm) swap to Silver
	At layer #18 (1.52mm) swap to White for the rest.


HueForge - Toby Keith - Grayscale

Toby Keith - Grayscale.3mf

Multicolor version of the Mario Brothers character, King Bob-omb. Scalable to your desired height. Print with supports, 10% infill; or use attached sliced file with presettings.  Flushing volumes optimized for less filament waste and faster printer time.

King Bob-omb - Mario Brothers

King Bomb-omb - Multicolor.3mf

Quick print lowpoly fox holding a heart in time for Valentines Day. Single color and multicolor options available. No supports necessary.

LowPoly Love Fox

Boxy Foxy - Two Color - 0.2mm - Sliced.3mf

Discover the intricate 3D model of the multi-color Crystal Lapras, a celebrated character from Pokemon brought to life by Deltree3D on Thangs.com. This detailed piece is a marvel of pop culture fandom, meticulously painted in Bambu Studio. It showcases a vivid six-color print that enhances the character's crystal version, providing an aesthetically pleasing collectible for enthusiasts. The model also offers flexibility with an "uncolored eyes" variant that requires only four colors. It necessitates supports for a successful 3D print and can be scaled to your preferred size, making it an ideal choice for online sellers searching for popular, high-demand pieces. Check out various visuals of this model on Thangs.com to appreciate its intricate 3D design. Get immersed in the imaginative world of Pokemon with this Crystal Lapras 3D model.

Crystal Lapras - Multicolor - Sliced.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #6 (0.56mm) swap to Gray
	At layer #12 (1.04mm) swap to Silver
	At layer #16 (1.36mm) swap to White for the rest.

HueForge - Dragon #2

Dragon 200x200 - Grayscale.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA PolyLite Beige Transmission Distance: 1.5
	PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #7 (0.64mm) swap to Grey
	At layer #12 (1.04mm) swap to Silver
	At layer #16 (1.36mm) swap to Beige
	At layer #17 (1.44mm) swap to White for the rest.


HueForge - Dragon

Dragon - Grayscale- 200x242.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #7 (0.64mm) swap to Grey
	At layer #11 (0.96mm) swap to Silver
	At layer #16 (1.36mm) swap to White for the rest.


HueForge - Suffocate

Suffocate - Grayscale - 200x200.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA+ Sunlu Black Transmission Distance: 0.6
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #4 (0.4mm) swap to Grey
	At layer #8 (0.72mm) swap to Silver
	At layer #13 (1.12mm) swap to White for the rest.


HueForge - Ape

Ape - Grayscale - 200x200.3mf

If you're feeling brave enough, multicolor option is made available. Use pre-settings for desirable outcome.

10% gyroid infill
0.1mm-0.2mm layer height
Supports required

Blastoise Battleship Benchy - Pokemon

Blastoise Battleship Benchy - Single Color - Sliced.3mf

Crystal version of the Pokemon character, Lapras. Quick print at 0.12 layer height. Supports necessary. Scalable. A new hit piece for you online sellers.

Crystal Lapras - Pokemon

Crystal Lapras - Sliced.3mf

Crystal Lapras.3mf

Crystal Lapras.stl

Blastoise Battleship Benchy - Multicolor - Sliced.3mf

Blastoise Battleship Benchy - Multicolor.3mf

Blastoise Battleship Benchy - Single Color.3mf

Blastoise Battleship Benchy - Single Color.stl

King Bob-omb - Multicolor - Sliced.3mf

2pactopus.3mf

A variety of custom HueForge art, multicolor models, and creations I found to be either useful or funny.

You're welcome to buy me a coffee should you enjoy any of my work.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Deltree3D

Achievements

Seedling

Fan Favorite

Pinned models

Crystal Lapras - Pokemon

Blastoise Battleship Benchy - Pokemon

King Bob-omb - Mario Brothers

2pactopus - Articulating

Deadpool Planter - No Supports

HueForge - Wall Art - "Fractured Memories"

HueForge Storage Box

HueForge - Wall Art - "Intergalactic Travel"

Caliper Sheath Mount

HueForge - Wall Art - "Twisted Expressions"

HueForge - Wall Art - "Space Bound"

HueForge - Wall Art - "Fragile"

HueForge - Wall Art - "Dapper Dan"

Flexi - "Jake the Snake"

HueForge - Elegant Screams

Robocop - Multicolor

2pactopus - Articulating

Hulk Bust - Multicolor - No Supports

Love Silhouette - Display Stand

HueForge - Toby Keith - Grayscale

King Bob-omb - Mario Brothers

LowPoly Love Fox

Crystal Lapras - Multicolor - Sliced.3mf

HueForge - Dragon #2

HueForge - Dragon

HueForge - Suffocate

HueForge - Ape

Blastoise Battleship Benchy - Pokemon

Crystal Lapras - Pokemon