Discover Blackpowder Creations' 3D model of a HueForged cover of Book 7 from the Harry Potter series on Thangs.com under the 'Art/Hueforge' category. This intricately designed 3D model showcases the emblematic features of the seventh book from the iconic Harry Potter series, beautifully representing the Deathly Hallows. It's is a must-have for all the hardcore fans of the wizarding world. The model is ideally sized for the A1 Mini; if resizing is needed, make sure to adjust only the x and y axis, leaving the z axis unchanged for maintaining the perfect proportions of the design. Don't miss out on adding this unique piece to your collection!

I release 2-3 free HueForge models and 3-4 exclusive/paid models every week. If you like my work please consider supporting me by joining my Thangs Membership. Its 50% off right now since its brand new.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 116.56x175mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Paramount 3D Decepticon Purple Transmission Distance: 1.8 PLA PolyLite Red Transmission Distance: 5 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Decepticon Purple At layer #16 (0.76mm) swap to Red At layer #27 (1.2mm) swap to Yellow At layer #35 (1.52mm) swap to White for the rest.