Discover Blackpowder Creations' 3D model of a HueForged cover of Book 7 from the Harry Potter series on Thangs.com under the 'Art/Hueforge' category. This intricately designed 3D model showcases the emblematic features of the seventh book from the iconic Harry Potter series, beautifully representing the Deathly Hallows. It's is a must-have for all the hardcore fans of the wizarding world. The model is ideally sized for the A1 Mini; if resizing is needed, make sure to adjust only the x and y axis, leaving the z axis unchanged for maintaining the perfect proportions of the design. Don't miss out on adding this unique piece to your collection!

_Sorry this one took longer, had to make some adjustments and fine tune it before I released it. Didn't like how it turned out originally. _

This release marks the completion of this Harry Potter Fan Art Book Cover set! This is the first set I've EVER completed. Very excited. Hopefully someone joins at some point <3

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 116.51x175mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Blue Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Green Transmission Distance: 1 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 This print uses 6 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Blue At layer #10 (0.88mm) swap to White At layer #12 (1.04mm) swap to Green At layer #14 (1.2mm) swap to Arctic Teal At layer #18 (1.52mm) swap to White At layer #21 (1.76mm) swap to Savannah Yellow At layer #23 (1.92mm) swap to White for the rest.