I created this HueForge of the book cover Harry Potter & Prisoner of Azkaban by Olly Moss. I've released the first 3 book covers completely free! If you're interested in the other 4 fan art book covers, you can join my Thangs Membership, or they're also available in my shop. The entire set is also available for purchase as physical 3D prints on my Etsy

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 116.51x175mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Red Transmission Distance: 5 PLA PolyLite Yellow Transmission Distance: 11 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #11 (0.56mm) swap to White At layer #24 (1.08mm) swap to Black At layer #25 (1.12mm) swap to Red At layer #28 (1.24mm) swap to Yellow for the rest.

I've added two versions, at two sizes. The smaller one (117x175) I used with my A1 Mini.