↓  Unlimited Model downloads / month
$  Commercial License (valid whilst plan is live)

Download and print as many models as you like, there is no limit! ALSO make money selling your prints with the included commercial license.

Only 10 memberships available.

Selling and or Distributing any of the files in this catalog is strictly prohibited

Super Seller

↓  12 Model downloads / month
$  Commercial License

Pick and choose 12 models to print every month! 

Selling and or Distributing any of the files in this catalog is strictly prohibited

Reccomended

↓ 5 Model downloads / month

Pick and choose 5 models to print every month!

Selling and or Distributing any of the files in this catalog is strictly prohibited

Select Annual billing for 20% off!

Personal

Infinity Trax is a modular magnetic marble run that can be built (and re-built as many times as you want) on ferrous metallic vertical surfaces such as fridges or magnetic whiteboards. It's part puzzle, part STEM toy, part artwork, and a truly unique marble run with more possible track designs than there are atoms in the universe!

I've made a version of this track [on live TV for Will Smith](https://deepmake.io/blogs/news/i-just-made-a-marble-run-for-will-smith); have had it displayed in museums around the world; it was featured at Cheltenham science festival; it's been used by numerous educational establishments; and is due to be installed at the HQ of a huge fortune 500 company. In short, it's been thoroughly tested and geek approved.

This is the 'Newton Edition' which means it includes all 17 trick and track sections for amazing gravity based marble runs.

I make other variations of this track that are available in my store. If you want to build your track bit by bit at a lower cost of entry, or want to make these STLs commercially, then become a member.

Due to the free form nature of track design, it transcends from 'just another marble run' to a mesmerising super-puzzle which provides endless hours of creative problem solving, imaginative play and is the toy that will be the most played with more than any other in the house.

Because making new tracks is easy and intuitive, the limiting factor to marble run glory is imagination and creativity, making it the perfect way to engage those beautiful brain cells. Don't be fooled though, simple is not the same as easy - you'll need to manage marble speed, and plan your run carefully in order to achieve true marble run greatness!

In the 'Farraday' there are 19 unique trick and track sections with over 180 separate STL files. Here's the pieces you'll be able to make:


- The Arm
- Straight 10cm
- Straight 20cm
- Mini Bend
- The Wheel
- The Corner
- The Double Backflip
- The Manual Launcher
- Third Dimension
- The switch
- The switchback
- The orbit
- Orbit return
- The Valley
- The Hill
- Zig-Zag
- Third Dimension
- 
Included in the download is a full 16 page set of instructions with links to build guide videos, as well as a detailed read-me section which has tips on best practices for 3D printing your track.

You'll need to buy magnets, as well as some glue and other small items to make your track. I made a shopping list which will be included with your download so you'll be able to easily purchase everything you need to make your marble run. The cost for materials for one track section is around $0.60 if you shop on Amazon, or around £0.25 on Aliexpress. 

In order to be able to make this, you will need a 3D printer with a bed size of 20x20x20cm

Infinity Trax | Newton Edition | Modular Magnetic Marble Run

Zig-Zag - B.stl

Zig-Zag - A.stl

Mini Bend - B.stl

Mini Bend - A.stl

Manual Launcher - B.stl

Manual Launcher - A (support).stl

Large Straight (20cm) - B.stl

Large Straight (20cm) - A.stl

Flex - B.stl

Flex - A.stl

Double Back Flip - B (support).stl

Double Back Flip - A (support).stl

Corner - B.stl

Corner - A.stl

The Wheel - B.stl

The Wheel - A.stl

The Valley - B.stl

The Valley - A (support).stl

The Switchback - B.stl

The Switchback - A.stl

The Switchback - A (95 Infill).stl

The Switch - B.stl

The Switch - A.stl

The Hill - B.stl

The Hill - A (support).stl

The Arm - B.stl

The Arm - A (support).stl

The Arm - A (95 infill).stl

Staris - A.stl

Stairs - B.stl

Space - B.stl

Space - A.stl

Orbit right - B.stl

Orbit right - A (support).stl

Orbit Reurn right - B.stl

Orbit Return right (support) - A.stl

Orbit Return left (support) - A.stl

Orbit Return left - B.stl

Orbit left - B.stl

Orbit left - A (support).stl

Infinity Trax is a modular magnetic marble run that can be built (and re-built as many times as you want) on ferrous metallic vertical surfaces such as fridges or magnetic whiteboards. It's part puzzle, part STEM toy, part artwork, and a truly unique marble run with more possible track designs than there are atoms in the universe! 

I've made versions of this track for [Will Smith(!)](https://deepmake.io/blogs/news/i-just-made-a-marble-run-for-will-smith), have had it installed in museums around the world, and HQ's of fortune 500 companies. It has also being used by many educational establishments and has been featured at Cheltenham science festival. In short, it's been thoroughly tested and geek approved. 

This is the 'Farraday Edition' which means it includes all the trick and track sections, as well as the Achimedes screw lift mechanism as well! 

I make other variations of this track that are available in my store. If you want to build your track bit by bit at a lower cost of entry, or want to make these STLs commercially, then become a member. 

Due to the free form nature of track design, it transcends from 'just another marble run' to a mesmerising super-puzzle which provides endless hours of creative problem solving, imaginative play and is the toy that will be the most played with more than any other in the house.

Because making new tracks is easy and intuitive, the limiting factor to marble run glory is imagination and creativity, making it the perfect way to engage those beautiful brain cells. Don't be fooled though, simple is not the same as easy - you'll need to manage marble speed, and plan your run carefully in order to achieve true marble run greatness!

In the 'Farraday' there are 19 unique trick and track sections with over 180 separate STL files. Here's the pieces you'll be able to make: 

- Archimedes screw Lift
- Archimedes screw lift extension
- The Arm
- Straight 10cm
- Straight 20cm
- Mini Bend
- The Wheel
- The Corner
- The Double Backflip
- The Manual Launcher
- Third Dimension
- The switch
- The switchback
- The orbit
- Orbit return
- The Valley
- The Hill
- Zig-Zag
- Third Dimension

Included in the download is a full 16 page set of instructions with links to build guide videos, as well as a detailed read-me section which has tips on best practices for 3D printing your track.

You'll need to buy magnets, as well as some glue and other small items to make your track. I made a shopping list which will be included with your download so you'll be able to easily purchase everything you need to make your marble run. The cost for materials for one track section is around $0.60 if you shop on Amazon, or around £0.25 on aliexpress. The cost for the materials for one Archimedes screw lift is around $25 if you buy on Amazon, or around $12 on aliexpress.

n.b. You will also need to use a soldering iron to be able to make the Archimedes screw lift.  

In order to be able to make this, you will need a 3D printer with a bed size of 20x20x20cm

Infinity Trax - Farraday Edition | Modular Magnetic Marble Run |

Archimedes Screw Lift Left - B.stl

Archimedes screw Lift Larger switch.stl

Archimedes Screw Lift Brass Rod Version - A (95 infill and brim).stl

Archimedes Screw Lift (right) - B.stl

Archimedes Screw Lift (right) - A.stl

Archimedes Screw Lift (Left) - A .stl

Archimedes Screw Lift - A (95 infill and brim).stl

Archimedes Screw Lift Extenson - A (95 Infill and brim).stl

Archimedes Screw Lift Extenson - A 'Brass Rod Variation' (95 Infill and brim).stl

Archimedes Screw Lift  Extension  (95 Infill and brim) Brass rod version.stl

Archimedes Extension (works with left or right) - A.stl

Archimedes Extension (Right) - B.stl

Archimedes Extension (Left) - B.stl

Infinity Trax is a modular magnetic marble run that can be built (and re-built as many times as you want) on ferrous metallic vertical surfaces such as fridges or magnetic whiteboards. It's part puzzle, part STEM toy, part artwork, and a truly unique marble run with more possible track designs than there are atoms in the universe! 

I've made versions of this track for [Will Smith(!)](https://deepmake.io/blogs/news/i-just-made-a-marble-run-for-will-smith), have had it installed in museums around the world, and HQ's of fortune 500 companies. It has also being used by many educational establishments and has been featured at Cheltenham science festival. In short, it's been thoroughly tested and geek approved. 

This is the 'Turing Edition' which means it includes all the trick and track sections, as well as the Achimedes screw lift mechanism, and Audio and LED section as well! 

I make other variations of this track that are available in my store. If you want to build your track bit by bit at a lower cost of entry, or want to make these STLs commercially, then become a member. 

Due to the free form nature of track design, it transcends from 'just another marble run' to a mesmerising super-puzzle which provides endless hours of creative problem solving, imaginative play and is the toy that will be the most played with more than any other in the house.

Because making new tracks is easy and intuitive, the limiting factor to marble run glory is imagination and creativity, making it the perfect way to engage those beautiful brain cells. Don't be fooled though, simple is not the same as easy - you'll need to manage marble speed, and plan your run carefully in order to achieve true marble run greatness!

In the 'Turing Edition' there are 21 unique trick and track sections with over 180 separate STL files. Here's the pieces you'll be able to make: 

- Audio Track
- LED section
- Archimedes screw Lift
- Archimedes screw lift extension
- The Arm
- Straight 10cm
- Straight 20cm
- Mini Bend
- The Wheel
- The Corner
- The Double Backflip
- The Manual Launcher
- Third Dimension
- The switch
- The switchback
- The orbit
- Orbit return
- The Valley
- The Hill
- Zig-Zag
- Third Dimension

Included in the download is a full 16 page set of instructions with links to build guide videos, as well as a detailed read-me section which has tips on best practices for 3D printing your track.

You'll need to buy magnets, as well as some glue and other small items to make your track. I made a shopping list which will be included with your download so you'll be able to easily purchase everything you need to make your marble run. The cost for materials for one track section is around $0.60 if you shop on Amazon, or around £0.25 on aliexpress. The cost for the materials for one Archimedes screw lift is around $25 if you buy on Amazon, or around $12 on aliexpress. The cost for the electronics required for the LED track section is approximately $25, and the cost for the Audio track section is around $53. Links to the pieces you need to purchase are provided, along with full instruction on how to upload your Arduino sketch to your finished part. 

n.b. You will also need to use a soldering iron to be able to make the Archimedes screw lift.  

In order to be able to make this, you will need a 3D printer with a bed size of 20x20x20cm

Turing Editions - Infinity Trax | Modular Magnetic Marble Run

LED Section - B.stl

LED Section - A.stl

Audio - B (support from build plate only).stl

Audio - A.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Deep Make

Achievements

Seedling

Trailblazer