tracking pixel
Sébastien D

IKEA FRIHETEN feet

by
DON’T PANIC
Follow
Follow
Remix Model
DON’T PANIC
DON’T PANIC
Image 1 of 2
IKEA FRIHETEN feet - Sorry guys I'm trying to upload assembly for my projects but this thangs thing is really buggy.

If I upload STL : I can't tell the viewer the files are part of an assembly (its a multi part object but this website doesn't detect / have the option to tell its an assembly) The other option is to upload a STEP file but as you can see the generated STL files (I only provide STEP, its Thanks that output the STL in this upload) the geometry is really bad. I have no control on it sorry this has to be fixed by thangs dev - 3d model
2D
3D
Makes
IKEA FRIHETEN feet - Sorry guys I'm trying to upload assembly for my projects but this thangs thing is really buggy.

If I upload STL : I can't tell the viewer the files are part of an assembly (its a multi part object but this website doesn't detect / have the option to tell its an assembly) The other option is to upload a STEP file but as you can see the generated STL files (I only provide STEP, its Thanks that output the STL in this upload) the geometry is really bad. I have no control on it sorry this has to be fixed by thangs dev - 3d model
IKEA FRIHETEN feet 3d model
2 Likes10 DownloadsJune 4, 2021


Credits to this user: https://www.thingiverse.com/thing:3447193

I've decided to raise my IKEA sofa so my vacuum robot can clean underneath.

The feet is 110mm long and this should me plenty enough for all commercially available robot. I personally have a Roborock S6 MaxV and its High enough. I've redesigned the file design to keep the taper of the original IKEA feet.

You'll need M8 bolts and my design works with 25mm long bolts.

I've included the bold so you can get all the measurements.

You'll also need to raise the caster wheels of the bed part. You can use this one https://www.thingiverse.com/thing:4149070


2 Likes10 DownloadsJune 4, 2021




2 Likes10 DownloadsJune 4, 2021