Watercolor Box for 10 half-pan units + Case 63mm x 178mm
IMPORTANT: Tested with Cotman Winsor & Newton half-pan watercolors.
Half-pan watercolor holder 10 units. Included are 1 3mf file with base and lid. (Printing separately recommended) You can place two 9mm x 1mm magnets. This design is practical since the watercolor tablets can be removed without problems.
My 3D printing parameters Nozzle 0.4 0.2 layer (3 bottom and 3 top) filling 15% perimeters 3 NO SUPPORTS REQUIRED I used PLA for this project and it turned out very well.
0 Likes0 DownloadsDecember 15, 2024