Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4675589.

A simple, customizable shaver holder that attaches to a shower pole.

As usual, this is a fully customizable design.

It can be customized for many different shower pole and shaver sizes. You can also choose whether you'd like it to hold one or two shavers.

This design is completely free and shared under a permissive license. Your support is hugely appreciated.

https://youtu.be/hQwaMG24oMo

<iframe width="560" height="315" src="https://www.youtube.com/embed/hQwaMG24oMo" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> Did you know?

Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects:

https://codeandmake.com/premium

Customizer

Please note that the .scad file included in this project is not compatible with the Thingiverse Customizer App. To customise this Thing, you must use the Customizer in OpenSCAD 2019.05 or later, as the .scad file uses features that were introduced in this version.

If you are unable to use OpenSCAD, we have included STLs of a number of variations of this design. If the exact size you are looking for cannot be found, please post a message in the comments and we'll do our best to upload a version for you as soon as possible.

OpenSCAD Customizer Options

This design has the following Customizer options:

Material

• Material_Thickness - Thickness of the material
• Material_Height - Height of the material

Pole

• Pole_Diameter - The diameter of the pole
• Pole_Gap_Angle - The angle of the gap

Hook

• Hook_Gap - Width of the gap between the hooks
• Curved_Hook_Gap - Curve the gap between the hooks
• Hook_Straight_length - Length of the straight section of the
• Hook_End_Curve_Radius - Radius of the end curve
• Hook_End_Curve_Angle - Angle of the end curve

Dual Hooks

• Dual_Hooks - Add a second hook
• Dual_Hooks_Offset_Angle - Offset angle of the hooks

Design Considerations

For the best grip, we recommend choosing a Pole_Diameter value that is slightly smaller than the actual diameter of your shower pole. For example, if you shower pole diameter measures 22mm, try a Pole_Diameter value of '21'.

Material

We recommend printing this holder in ABS filament for extra durability.

Versions

1.0 (5 Dec 2020) - Initial version

Printing

Recommended slicer settings:

• Resolution: 0.1mm - 0.2mm
• Infill: 20% - 100% depending how durable you'd like it to be.
• Supports: Yes, if the hook end is curved (Hook_End_Curve_Angle)
• Rafts: No, unless you have adhesion issues.

License

The "Shower Shaver Holder" models (.stl) are licensed under the CC BY license by Code and Make.

The "Shower Shaver Holder" code (.scad & .json) is licensed under The MIT License by Code and Make.

We are proud to offer content to you absolutely free.

We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:

https://codeandmake.com/support

We thank you so much for your support!