This little guy decided to be a ghost for Halloween. Just be careful not to print two of them at once, otherwise you'll have a pair of Boo Bees on your plate.

Printed at 0.2mm height with tree supports. Caution advised when removing supports around the antennae.

Halloween Freebie - Cute Costumed Critter - Ghost Bee

boo_bee.stl

This one is probably a little on the nose, but hey, can't argue with a pirate parrot. He's a bit unbalanced, so he's gonna tip over unless you use a modifier to add infill to the bottom of the model.

Printed at 0.2mm height with tree supports.

Halloween Freebie - Cute Costumed Critter - Pirate Parrot

pirate_parrot.stl

This little guy is a fan of Naruto and modeled his costume after the show. Clearly, he has ice jutsu.

Printed at 0.2mm height with tree supports.

Halloween Freebie - Cute Costumed Critter - Polar Bear Ninja

polar_bear_ninja.stl

It's a cute pig dressed as the Phantom of the Opera, not much more to say, yeah?

Printed at 0.2mm height with tree supports.

Halloween Freebie - Cute Costumed Critter - Hampton of the Opera

pig_phantom.stl

In this pack, the critters are dressed as cute or silly things. We have a bunny dressed as a bat, a chihuahua werewolf, a karate skunk, a rhino ballerina, sheriff tiger, and a gator who is either dressed as granny, or a mad scientist!

Printed at 0.2mm height with tree supports. The gator's glasses broke when removing supports a bit too aggressively -caution or upscaling advised.

Halloween Print - Cute Costumed Critters - Silly and Cute Edition

baty_bunny.stl

In this pack the critters decided to dress as their D&D characters. Unfortunately, the foreign exchange pig didn't quite understand the assignment, so he dressed as a dragon, because he cannot be the dungeon, clearly. Wizard frog seems a bit upset with the situation, while rogue mouse and dragon knight are ready to go!

Printed at 0.2mm with tree supports. Highly recommended you either upscale or take care when removing supports around the blades and wings. The mouse's dagger broke when I removed supports, but I wasn't being particularly careful.

Halloween print - Cute Costumed Critters - LARP Edition

dragon_knight.stl

In this pack, the little critters decided to dress as their favorite pop culture icons! The Badger bros are clearly fans of slasher films, while Sherlock Lamb loves a good mystery! Kangaroo's idol is the jumping plumber, while otter appreciates the courage of a certain elf-like hero!

I printed at 0.2mm with tree supports. Otter has been hit with a coat of primer, and one of the badger bros lost a knife when something was sat on them by mistake.

Halloween Print - Cute Costumed Critters - Pop Culture Edition

kangaroo_mario.stl

In this pack, the critters decided to dress up as some classic horror icons! The panda twins dressed as Frankenstein's monster, the hamster decided to be a mummy, the fox is quite the jolly vampire, and the turtle went all out on his zombie costume!

Printed at 0.2mm height with tree supports in Elegoo ASA on my Sovol SV08.

Halloween Print - Cute Costumed Critters - Classic Monsters

zombie_turtle.stl

Just some cute prints I made for Halloween. In this pack, the critters decided to dress as their dream job. Officer Raccoon and Firefighter Koala are here to save the day, while Chef Penguin is here to make a meal and the Magnificent Magician Giraffe is bringing the entertainment!

No pics of the Koala at the moment, he's in processing for paint.

Printed at 0.2mm height, tree supports with no interface.

Halloween Freebie - Cute Costumed Critters - Real Jobs edition

chef_penguin.stl

Always been a fan of Frankenstein - It's a good story. Keeping with my steampunk themed, we have one of what I feel would be a series of monsters created by the doctor in a steampunk universe, as evidenced by the giant letter D on his chest - indicating he is at least the 4th model the doctor has created. I like to think he has added progressively more machinery to the creature, and future iterations would be more akin to some twisted steampunk Terminator than the classic creature.

Printed on my Bambu A1 mini in Sunlu PLA Pro. 0.2mm layers, tree supports, no interface, 0.2mm top and bottom distance, disable "support on build plate only" just in case.

The shinier bits are covered in a clear silicone for painting purposes.

I included some rough polypaint shots to show what I had in my head when working.

Custom Halloween Bust - Steampunk Frankenstein's Monster

steam_frankie._180mmstl.stl

Made some cute critters in costumes for spooky season - This was a rushed paintjob, so it's not great, but it's darned cute either way. Needs supports, but only around the bottom few spikes.

Printed on Bambu A1 Mini Combo with Sunlu PLA Pro. 0.2mm layers, tree supports, no interface, 0.2mm top and bottom distance.

Halloween Freebie - Cute Hedgehog in Candy Corn Costume - AMS-Lite Print

Candy corn hedge_solo.3mf

The doc has been at it again, this time creating this poor amalgamation of a creature - He looks rather harmless and tortured, doesn't he?

Printed in Sunlu PLA Pro on my Bambu A1 mini. 0.2mm layer height. Tree supports, 0.2mm top and bottom distance, no interface, disable "support on build plate only."

Halloween Bust - Steampunk Vampire Bat Creature

steampire_bat_160mm.stl

Steampunk + Child's Play is the stuff the animatronics from FNAF have nightmares about. Celebrate spooky season with a possessed murderous "My Buddy" doll wannabe!

Printed in Elegoo Wood Fill PLA on my Ankermake M5C. 0.16mm layer height. Tree supports, 0.2mm top and bottom distance, disable "support on build plate only."

Halloween Fanart - Steampunk Chucky bust

steam_chuck_180mm.stl

This spooky season, I kicked off with a steampunk horror theme - To that extent, one of my favorite movie monsters is the xenomorph from Alien. How do you take a bio-engineered killing machine and put it in a steampunk universe? You make it a mechanically engineered killing machine.

I included some concept paint renders from Zbrush, but I would be curious to see what other do with colors for it.

Printed in Sunlu ASA on my Sovol SV08. 0.2mm layers. Tree supports, no interface, 0.2mm top and bottom spacing.

Halloween Fanart - Steampunk Xenomorph bust

steam_xeno_180mm.stl

Viral sensation Moo Deng doing what she does best, bringing the pain and the cuteness, and a second figure of her just being cute for those brief peaceful moments.

Printed in Sunlu PLA Pro on my Sovol SV08. 0.2mm layer height. Tree supports, 0.2mm top and bottom distance, no interface, disable "supports on build plate only" for the biting pose, shouldn't matter for the standing pose.

Freebie - Moo Deng Fanart - Biting and Standing poses - Cute baby hippo figurines

moodeng_bite.stl

Moo Deng is the adorable baby pygmy hippo who has become a viral sensation. As hippos have long been one of my favorite animals, I couldn't resist making a few little figures inspired by her. Given the spooky season now upon us, I decided to put her in a little costume.

Printed in Sunlu PLA Pro on my Sovol SV08. 0.2mm layers. Tree supports, 0.2mm top and bottom distance, no interface, you should probably disable "supports on build plate only" as some of her rolls need to be supported from the base.

Halloween Freebie - Cute baby hippo in a witch hat - Moo Deng inspired fanart

moodeng_witch.stl

Another design I did for Spooky Season. Printed this one in Elegoo Wood Fill PLA on my Ankermake M5C.

0.16mm layer height (you could get away with 0.2). Tree supports, no interface, 0.2mm top and bottom distance, disable "supports on build plate only." 

Should be scalable, I didn't want to burn the filament to print this thing to fit my melon.

Halloween Freebie - Steampunk Oni Mask

oni_v1_cut.stl

Ran with a theme for my early Spooky Season print designs, steampunk horror. So here we have the Pumpkin King, colored in Bambu Slicer for my A1 Mini combo. 

Printed at 0.2mm layer height, tree supports with 0.2mm top and bottom gap and no interface, disable "supports on build plate only"

I put two on the plate to save filament on changes, but you can easily scale it up. I wouldn't scale it down by much, if at all, however.

Custom Halloween Freebie - Steampunk meets The Pumpkin King for AMS-Lite

steampunkin_a.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ClintsPrints

Achievements

Seedling

Debutant