SPHINX | Watering Can with dosing cup

Scared of over-watering your succulents?

This mini watering can comes with a dosing cup, and has pouring spouts on each side to cover all angles and accomodate lefties and righties.

And... it doubles up as a mini vase.

And... it looks like a cat!

Although It wasn't meant to look like one. But form very literally followed function I guess!

I wanted this watering can to have:

• a dosing cup
• a spout on each side of the dosing cup
• a main container protruding right and left so that when you empty the cup the water stays in the main container without spilling all over your hand.

Add all of that together and, well, it looks like a cat...

Happy printing!

**DIMENSIONS | **W 115mm x L 115mm x H 135 mm

Printing | ~2.5h

3D PRINTING SETTINGS

For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. That should do it!

Resolution: 0.2mm / layer or less Infill: gyroid ~20% Build adhesion type: None **Supports: ** None