AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
Willi 3D

[BaBo duo] plate module

by
Willi 3D
Follow
Follow
Remix Model
Social
C
Chainlink
|
|
Image 10 of 10
[BaBo duo] plate module - Pic 1: Guide rails don't match up with the faceplate, making the build plates pop out too easily. Pic 2: The spring guide needs a little more tolerance. Pic 3: The recess for the tenon on the guide is a little tight and would work better if it was a little deeper. Pic 4: The build plates are only locked in on one side: an asymmetric solution that holds the build plate in on both sides would be a nice upgrade. - 3d model
C
Chainlink
|
|
Image 10 of 10
[BaBo duo] plate module - Pic 1: Guide rails don't match up with the faceplate, making the build plates pop out too easily. Pic 2: The spring guide needs a little more tolerance. Pic 3: The recess for the tenon on the guide is a little tight and would work better if it was a little deeper. Pic 4: The build plates are only locked in on one side: an asymmetric solution that holds the build plate in on both sides would be a nice upgrade. - 3d model
2D
3D
Makes
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module 3d model
[BaBo duo] plate module - Pic 1: Guide rails don't match up with the faceplate, making the build plates pop out too easily. Pic 2: The spring guide needs a little more tolerance. Pic 3: The recess for the tenon on the guide is a little tight and would work better if it was a little deeper. Pic 4: The build plates are only locked in on one side: an asymmetric solution that holds the build plate in on both sides would be a nice upgrade. - 3d model
This model is restricted by licensing terms. 
View license.

Create your BaBo organizer! A system created to store them all!

Description:

This is the BaBo duo plate module. This can hold 3 or 5 plates and gives the drawer module more stability and prevents it from bending in the middle.

It is only compatible with the [BaBo duo] modules and not with the [BaBo] modules

BaBo organizer is a stationary, very flexible system to store your Bambulab tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.

Update: (26/01/24)

  • added 5 plate version

(16/08/24)

  • front and back part reinforced to avoid deflection
  • tolerance for springs changed
  • improving the guides
  • front look changed

Printing: Layer height: 0.2 Supports: No Brim: No Material: all (PETG for the springs)

**Assembly: ** Follow the instructions in the picture.

  • printed parts
  • 12 x M3x8 countersunk screws

Categories:

3d Printers
Bambu Lab
,
Functional
Organizers
16 Likes120 DownloadsFebruary 22, 2024
16 Likes120 DownloadsFebruary 22, 2024
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy