A collection of the cutest flexis out there!

Check out the latest Spider my [GENTLEMAN SPIDER](https://thangs.com/designer/Peter%20Prints/3d-model/Sophisticated%20Flexi%20Jumping%20Spider-1089716)!

*UPDATE - V2 changes a few small things for lil Bitsy the Spider!*
       
1. I've widened the area between the leg joint and the joint walls. There should not be any more fusing going from the legs/ walls touching.
2. Lowered the polygons a bit for people printing multiples.

*I will be leaving v2 up for FREE for one more week until 6/27 now as a thank you to all who downloaded my cute lil spider, and to give people a chance to get the updated model!*

I've wanted to do this one for awhile. FOLLOW me for more like it because...I'M NOT DONE with this guy! 

I'm thinking top hat, santa hat, moustache, 90's grunge? Anyone? FUZZIER! SOPHISTCATED-ER!

This itsy spider named "Bitsy" is my attempt at creating a cute articulated jumping spider. What's even cooler is the ability of this lil' guy to fully articulate his pair of four legs all the way around his bottom and they can touch toes together. I've even got him to hang on to a piece of string with no glue or tape! YMMV with that one...

I have been loving the craze centered around these fuzzy little adorable inntelligent creatures. I never knew spiders could be so...personable. So here is my homage, in lieu of owning a tiny arachnid myself. (Read my post [HERE](https://than.gs/p/4346) for more fun info on jumping spiders) 

Included in the .3mf is a fully painted a1 project & a1 mini project. The STL files are single object files, used for printing in single colors. The blue spiders in my photos are painted eyeballs. FYI.

These little fuzzy mandible spouting spiders are divided into several parts, that can all be colored separately in the .3mf. Body, left and right sets of four legs, head, large eyes, large eye accent, small eyes, small eye accent, and mandibles can each be selected as a different color.

I recommend .16mm layer height, 3 walls and at least 10% infill, if not more to stiffen up those tiny little joints.

All Peter_Prints designs are under Copyright and you may NOT sell any digital files or prints of my designs.

To sell physical prints of my designs join [MY THANGS MEMBERSHIP](https://thangs.com/designer/Peter%20Prints) for commercial rights to sell my prints.

Let me know if you run into any issues printing this, and SHOW me those cute spiders! PLEASE, I want to see them!

"Bitsy" the Flexi Jumping Spider

Peter Prints - Bitsy Flexi Jumping Spider v1.stl

NO AI HERE IN THIS DESCRIPTION :]
After a couple months break (dealing with life - annoying how it gets in the way) I'm back creating food-themed animal creatures for some reason. This is my "DoughCroak", the frog-leg-extending donut-frog adorable mashup creature. Why do I make these? Who can say? Maybe it's the adorableness factor. Maybe it's the donut factor. Maybe I like putting sprinkles on things. Yes to all of the above.

This guy prints best in 5 colors, but prints fine in one color. I've included three colored versions in the 3MF if you want to print him in four colors like I did, and paint some white sprinkles and his tongue. (I prefer to have the whites of his eyes printed, so they are nice and sharp and consistent since my painting needs work.)

I printed him with the included profile in the 3MF just fine, but I recommend 3 walls, 10-15% gyroid, slow it down a little for the early overhangs, and it should be just fine!

By the way, the feet should extend and if you pull them out gently, he can stand up on them higher than the model sits naturally. I'll post a photo of it shortly. 

Thanks for stopping by, AND if you have anything you'd like to recommend I model next, leave me a comment below!

All Peter_Prints designs are under Copyright and you may NOT sell any digital files or prints of my designs.

To sell physical prints of my designs join [MY THANGS MEMBERSHIP](https://thangs.com/designer/Peter%20Prints) for commercial rights to sell my prints.

Let me know if you run into any issues printing this!



DoughCroak - Donut Frog with Articulated Frog Legs

DoughCroak Donut Frog Single Color - Peter Prints.stl

Cute Flexis

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

CO23PO

Achievements

Novice Maker

Cute Flexis

"Bitsy" the Flexi Jumping Spider

DoughCroak - Donut Frog with Articulated Frog Legs