For Friday this week a bunch of different wall art pieces to share. First up is Batgirl on her bike in a comic style picture.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 143.68x210mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Beige
Border Only Colors from here until the end.
At layer #22 (1.84mm) swap to Jade White for the rest.
