4th in the series on open books I started a couple weeks back. This one depicts space and sci-fi worlds from pages of a book.
For this print:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 167.78x209.73mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Beige Transmission Distance: 8.2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Blue At layer #9 (0.8mm) swap to Beige At layer #19 (1.6mm) swap to Ivory White for the rest.